Day Tv Guide; Usb Record - Digital Mode - Sharp LC-40UG7252E User Manual

EN
settings on AQUOS NET+, you must fi rst enter the Settings menu of the
portal and select "Reset your Portal". Please select YES with cursor and
then press OK on the remote control to confi rm the reset of the settings.
NOTE: To meet our customers' demands, we are improving our
products. As a result of our ongoing eff orts new applications will
be added continuously to the AQUOS NET+. Applications and
content in AQUOS NET+ can be changed without notice. Some of
the functions and content may not be available in your country.

7 Day TV Guide

TV Guide is available in Digital TV mode. It provides information about
forthcoming programmes (where supported by the Digital channel). You
can view the start and end time of all programmes and on all channels for
the next 7 days and set reminders.
1. Press [TV GUIDE]. The following 7 Day TV Guide will appear.
Navigate through the menu using ▲/▼/◄/►.
2.
You can now:
Record selected TV channel and TV show by pressing the RED button.
Set a reminder by pressing GREEN.
View a previous day by pressing YELLOW.
View the next day by pressing BLUE. [INFO] shows detailed
information about the selected post
3. Press [EXIT] to exit the 7 day TV Guide.

USB Record - Digital mode

Built into this television is a USB record facility. This function is available in
Digital mode when used in conjunction with a compatible USB memory
stick or USB Hard drive. The benefi ts of this are as follows:
• Pause live TV and then playback, fast forward and rewind (up to live TV).
• One button record, if you decide you want to record the current
programme.
• Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use a high speed USB
memory stick (as the TV reads from and writes to the memory stick at the
same time, some memory sticks may not be suitable).
Minimum Specifi cation - USB Memory Stick
– Read Speed - 20 Mb/s (Megabit Per Second)
– Write Speed - 6 Mb/s (Megabit Per Second)
Pause Live TV (Time Shift)
Pausing Live TV is very simple.
• Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
• Press fast forward to go forward in a recording (i.e. to skip adverts).
• Press fast rewind to go back in a recording (i.e. if you fast forwarded too
far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode.
Due to copyright laws and illegal copying/recording it is not
possible to record to/from any other input/output source.
HDR (High Dynamic Range)
HDR video removes some of the limitations of a standard video signal and
shows the image built from a wider gamut of colour and brightness.
NOTES:
– HDR function will activate automatically if an HDR
signal is detected, provided that HDMI EDID has been
set to "Enhancement" in the 'SETUP' menu.
– This television can display HDR content via the HDMI or USB inputs.
– If you are connecting via one of the HDMI ports, the external device
must also support HDR, HDMI2.0 and be playing HDR mastered content.
– This device does not support HDR content from
inbuilt apps such as Netfl ix or YouTube.