Advertisement
Quick Links
Maintenance
It is particularly important to keep your plug and cord clean and in good working order.
The motor and drive gears can be expected to give years of trouble free use if maintained
and serviced regularly. We recommend the following be done at the end of each season,
or more often to heavy use.
● Gears: Every 200 hours (clipping time) remove the head. Wipe the clipper head and
gearwheel to remove hair and grease. Coat the gearwheel with clean oil. When the
clipper head is removed, check the gearwheel for wear and broken teeth.
● Filters: The motor air filter should be frequently removed and meticulously cleaned
(brush supplied) to ensure efficient running of the motor. To clear, a high-pressure hose
is best. Otherwise wash in detergent solution and dry carefully. If maintenance is
ignored, overheating of the motor can occur and damage the motor.
FURZONE WARRANTY REGISTRATION
Professional
614
Clipper
Advertisement
Related Manuals for Furzone 614
Summary of Contents for Furzone 614
- Page 1 Clipper ● Filters: The motor air filter should be frequently removed and meticulously cleaned FURZONE WARRANTY REGISTRATION (brush supplied) to ensure efficient running of the motor. To clear, a high-pressure hose is best. Otherwise wash in detergent solution and dry carefully. If maintenance is...
- Page 2 ● The motor is double insulated; do not connect any wire to the E or earth pin of 3-pin The 614 comes with a variable speed switch which allows it to go from 1500 spm to 2700 spm. Because the torque for this clipper is so strong, it is rarely necessary to run it on high.
Need help?
Do you have a question about the 614 and is the answer not in the manual?
Questions and answers