LG RCWFH Series Instruction Manual page 8

8
• Do not operate with wet hand.
- It may cause electric shock.
• During maintenance work, check whether all of the power lines connected to the control panel or starter panel are
interrupted.
- It may cause electric shock.
• When power is on, do not open the door of control panel or starter panel, and protective cover.
- It may cause electric shock.
• Do not open the circuit breaker without permission while running.
- It may cause damage or malfunction.
• Tighten bolts and screws with the specified torque.
- Otherwise, it may cause fire, damage, or malfunction.
• Do not change electric or control devices arbitrarily.
- It may cause fire, damage, or malfunction.
• Only the persons who have sufficiently studied the user's manual should operate the control panel or starter panel.
- Otherwise, it may cause injury, fire, malfunction, or damage.
• Do not perform welding work near cables connected to the main unit.
- Otherwise, it may cause fire or damage.
• Connect only the input/output signal cables specified in the drawing to the control panel or starter panel.
- Otherwise, it may cause malfunction or damage.
• Use the rated electrical cables.
- If not, it may cause fire or damage.
• Use specified parts for repair.
- If not, it may cause fire or damage.
• Install the machine, control panel, and starter panel at a place where there is no combustible material.
- Otherwise, it may cause fire.
• Do not exceed the voltage supply limit described in the relevant manual.
- Otherwise, it may cause damage or malfunction.
• Connect the signal cables connected to the control devices following the circuit diagram.
- It may cause damage or malfunction.
• Do not store the product in a place where is a flooding risk or a lot of moisture.
- Otherwise, it may cause damage or malfunction.
• Do not use the indoor control panel or starter panel outside of the building.
- Otherwise, it may cause damage or malfunction.