EUCHIPS EUP10D-1HMC-0-350 User Manual

EUP10D-1HMC-0-350
(Product No.: 102100720201)
Summary
EUP10D-1HMC-0-350 is a 10W AC/DC constant current mode output LED driver featuring
the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC
62386. EUP10D-1HMC-0-350 can be connected to DALI main controller or Touch DIM(Push
DIM) to achieve a smooth dimming effect.
Product Feature
·Single channel output, output current level selectable by DIP S.W.
·Meet DALI Protocol IEC 62386-207
·Support Touch DIM (Push DIM)function
·High efficiency up to 80%
·Built-in active PFC function
·Dimming effect smooth, no flicker
·Protections: Short circuit, over load, no load
·Suitable for indoor LED lighting application, such as down light, spot light, and so on
Technical Parameters
Model EUP10D-1HMC-0-350
Efficiency
Voltage
Frequency
Power Factor
Input
THD
Current
Inrush Current
Current/voltage/power
Ripple Current
Channel
Output
Current Tolerance
Standby Power
No Load Output Voltage
Turn On Delay Time
Dimming Mode
Function
Dimming Range
No Load
Protection
Short Circuit
Over Load
Surge
Safety Withstand Voltage
DALI Standrad
Working Temp.
Storage Temp.; Humidity
Tc
Material
IP Rating
Others
Lifetime
Warranty Condition
Switch Cycle
Packing Size
Dimension
G.W
User's manual: 2019-8
>80%@230VAC, Full load
220VAC-240VAC
50/60Hz
0.95@230VAC, Full load
<10%@230VAC, Full load
0.06Amax@230VAC, Full load
cold start,10A(twidth=10us measured at 50% Ipeak@230VACC
350mA/2-24VDC/8.4W 450mA/2-22VDC/9.9W
400mA/2-24VDC/9.6W 500mA/2-20VDC/10W
<3%
1
±5%
<0.5W
30V Max
<1s, at 230Vac
DALI
1%-100%
The LED Driver will not be damaged.
No Output, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
L-N:500V
I/P-O/P: 1500VAC
IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0
-20℃~50℃
-40℃~85℃, 20-90%RH
75℃
PC
IP20
50,000h@tc:75℃
5 years
>100,000 times
515*235*140mm(L*W*H), 9.5Kg/Carton/100PCS
110*30*22.5mm(L*W*H)
90g
1/2
DALI Constant Current Dimming Driver
550mA/2-18VDC/9.9W 650mA/2-15VDC/9.75W
600mA/2-16VDC/9.6W 700mA/2-14VDC/9.8W
Current Selection Table
350mA 400mA 450mA
ON OFF
2-24V 2-24V 2-22V
550mA 600mA 650mA
ON OFF
2-18V 2-16V 2-15V
Remark: Function default setting is: 350mA (@switch are all OFF state)
Touch DIM(Push DIM)
500mA
2-20V
700mA
2-14V
www.euchips.com