NRS M78342 Technical Data Sheet

Product Range
M78342 Slatted Bath Board 660 (26")
M78354 Slatted Bath Board 686 (27")
M78366 Slatted Bath Board 711 (28")
Product Description & Intended Purpose
Designed to provides a safe and comfortable transfer
platform for those who are unable to step in and out of
the bath.
Product Features

Reinforced PVC slats for durability.

Tapered slats to encourage rapid drainage.

Stainless steel fittings to prevent rust.

Rubber pads for secure, non damaging grip on bath.

Optional grab handle for added support.
Technical Specification
Dimensions (mm)

Length: model dependent.

Width: 230

Bracket to Board End: 25 — 90
Installation Information: (Note: for detailed information refer to User Instructions)

Attach the brackets to the board by loosely screwing the hand wheels through the central slot, into
the corresponding screw thread.

Place the board across the top of the bath with the brackets facing up and the edge of the board
pushed against the wall. Slide the far bracket into position, in line with the inside edge of the bath
and tighten the hand wheel.

Turn the board over with the furthest pads against the edge of the bath. Reach underneath and
slide the nearest bracket pad up to the edge and secure using the hand wheel.
Product Technical Data Sheet 074
Slatted Bath Board Range
Product Weight: M78389
Maximum User Weight: 30st (190kg)
2.22kg
M78391 2.37kg
M78408 2.5kg