Functions And Settings Programming - A2T NT-120S Operating Manual

5.Functions and settings programming

5.1 Enter the programming mode
Press [#] + [ 6-digit pin](default: 881, 122)
5.2 Modify the programming PIN:
Press [0]
+ [new 6-digit pin]
+ [confirm the news 6-digit pin]
5.3 Eroll card:
Press [5] + [3-digit index code] (2 beeps)
+ [card 1] (beep,2 beeps)
+ [card 2] (beep, 2 beeps)
+ ... ...
+ [card n] (beep,2 beeps)
+ [#] (2 beeps)
5.3.1. 3-digit index code: rang from 001-----999 number can
not be repeated. The code is an important way deleted
the card after the card is lost, please save the card coded
issuer properly
5.3.2. When enrolling multiple cards, every card index code will
be calculated in order. For example, card one's indes code
is 015, once again, card two's will be 016 ... ... and so on
5.3.3. The default private pin for each card is: 0000