Page 2
This is the user's manual where you will find all the neces- sary instructions to carry out the basic maintenance of all our components If your Terrae is regularly serviced and used in the right way, it will accompany you faithfully over time, maintain- ing its performance unaltered.
Page 3
Do not clamp a frame tube or a car- and hence lead to an accident. Always bon seat post of your FRM in the hold- follow exactly the tightening torque details ing jaws of the workstand! Be sure to...
Remove the protective film and sleeves i.e. three areas where too much clamping Apply a thin and even film of FRM assem- Keep the entire packaging material force can damage either component, bly paste to the cleaned surfaces using a from the handlebars.
THE SEATPOST Put the matching bit into the holder of the Position the handlebars by means of the Apply a little FRM assembly paste on the torque wrench. Release the clamping marking accurately centred in the stem bottom part of the seat post and inside the bolts of the stem faceplate and remove clamp.
“L” for left cated charger. Never apply any grease or oil to clamp- Never ride your FRM if the MAX mark- pedal. Note that the left pedal has a When done, insert it in the apposite slot ing areas made of carbon! ing of the seat post is visible.
100 to 300 km (60 to 180 miles) After completing the assembly and checks it is essential to give your FRM a test ride in a level, unfrequented area (e.g. in a parking lot)! Wrong assembly or improper adjustments that become...
Page 8
TERRA E / S U G G E S T E D S E R V I C E I N T E R V A L S If you have good manual skills, experience and the right tools (e.g. torque wrench), you can carry out the checks yourself.
Page 9
TERRAE / C O M P O N E N T S FRAME REAR DERAILLEUR SADDLE FRM Terrae Carbon T 800, 3K GX Eagle Lunar AXS Repente ARTAX GL FORK CASSETTE TIRES FRM T 800, 3K SRAM X-Glide 1295 Black 12S 10-52...
Need help?
Do you have a question about the Terrae and is the answer not in the manual?
Questions and answers