Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ALFAtron ALF-SUK4T
Summary of Contents for ALFAtron ALF-SUK4T
- Page 1 ALFATRON ELECTRONICS GmbH GERMANY ALF- SUK4T...
- Page 2 ALF-SUK4T FCC Statement This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
-
Page 3: Table Of Contents
ALF-SUK4T Table of Contents 1. Introduction...................... 1 2. Features......................1 3. Package Contents..................1 4. Specifications....................2 5. Operation Controls and Functions............3 5.1 Transmitter....................3 5.2 HDBaseT Receiver................... 5 5.3 IR Pin Definition..................6 6. EDID Mode......................7 7. ASCII Commands.................... 8... -
Page 4: Introduction
ALF-SUK4T 1. Introduction The ALF-SUK4T is an 18Gbps HDMI 1x4 HDBaseT Splitter. The ALF-SUK4T distributes a source signal to four displays and supports video resolution up to 4K@60Hz 4:4:4. It is designed with 1 HDMI loop output and 4 HDBaseT outputs. -
Page 5: Specifications
ALF-SUK4T 4. Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 Video Bandwidth 594MHz/18Gbps Video Resolution Up to 4k2K@60Hz 4:4:4 8-bit,10-bit,12-bit(1080p@60Hz) Color Depth 8-bit (4K2K@60Hz YUV4:4:4) 8-bit,10-bit,12-bit(4K2K@60Hz YCbCr 4:2:2/4:2:0) RGB 4:4:4, YCbCr 4:4:4 / 4:2:2 / 4:2:0 Color Space Support HDR, HDR10+, HLG, Dolby vision LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD,... -
Page 6: Operation Controls And Functions
ALF-SUK4T Mechanical Housing Metal Enclosure Silkscreen Color Black Transmitter: 220mm (W) × 130mm (D) × 40mm (H) Dimensions Receiver: 140mm (W) × 65mm (D) × 18mm (H) Transmitter: 853g Weight Receiver: 246g Input: AC100 - 240V 50/60Hz, Output: DC 24V/2.7A... - Page 7 ALF-SUK4T Rear Panel Name Function Description Connect to a PC or control system via a 3-pin phoenix connector cable for three functions: 1, Firmware update; RS-232 2, Control the Splitter via RS-232 commands; 3, RS-232 signal pass-through (from transmitter to receiver or from receiver to transmitter).
-
Page 8: Hdbaset Receiver
ALF-SUK4T Data Signal ▪ Illuminating: HDMI signal with HDCP. Indicator lamp ▪ Flashing: HDMI signal without HDCP. ▪ Dark: No HDMI signal. (Orange) Plug the DC 24V power supply into the unit and connect the adaptor to an AC outlet. (Note: The transmitter can power DC 24V the receiver via a CAT 6 / 7 cable.) -
Page 9: Ir Pin Definition
ALF-SUK4T AUDIO OUT Audio output port, connects to amplifier or speaker. Connects to the IR Receiver cable. The IR signal will send IR IN to the IR OUT port of the transmitter. Connect to the IR emitter cable, the IR signal is from IR IR OUT IN port of the transmitter. -
Page 10: Edid Mode
ALF-SUK4T 6. EDID Mode The defined EDID setting list of the product is shown as below: EDID Mode EDID Description 11111 1080P, Stereo Audio 2.0 11110 1080P, Dolby/DTS 5.1 11101 1080P, HD Audio 7.1 11100 1080I, Stereo Audio 2.0 11011 1080I, Dolby/DTS 5.1... -
Page 11: Ascii Commands
ALF-SUK4T ASCII Commands The ALF-SUK4T also supports ASCII command control. Connect the RS-232 port of the product to a PC with a 3-pin phoenix connector cable. Then open a Serial Command tool on PC to send ASCII commands to control the product.The ASCII command list about the product is shown as below. - Page 12 ALF-SUK4T Command Code Function Description Example Feedback Default Setting Output Setting Enable hdmi loop out Set hdmi loop output stream stream on/off s hdmi stream z! s hdmi stream 1 ! enable Disable hdmi loop out z=0~1(0:disable,1:enable) stream Enable hdmi loop out...
- Page 13 ALF-SUK4T Command Code Function Description Example Feedback Default Setting EDID Setting Set input EDID from default EDID z, z=1~27 1, 1080p,Stereo Audio 2.0 2, 1080p,Dolby/DTS 5.1 3, 1080p,HD Audio 7.1 4, 1080i,Stereo Audio 2.0 5, 1080i,Dolby/DTS 5.1 6, 1080i,HD Audio 7.1 7, 3D,Stereo Audio 2.0...
- Page 14 ALF-SUK4T Command Code Function Description Example Feedback Default Setting RS-232 BYPASS Setting Set RS-232 port connect to RS-232 connect to HDBT out1 Receiver RS-232 s rs232 bypass s rs232 bypass HDBT OUT1 port, y=0~5( 0=all, hdbt 1! hdbt y! RS-232 not connect...
-
Page 15: Application Example
ALF-SUK4T 8. Application Example -12-... - Page 16 ALF-SUK4T After-sales Service Should you experience problems using the ALF-SUK4T, please note that any transport costs of the equipment to the distributor are borne by the user during the warranty. Product Limited Warranty: Alfatron warrants that its products will be free from defects in materials and workmanship for seven years, which starts from the first day of purchase.
- Page 17 ALF-SUK4T Warranty Limited warranty in respect of Alfatron Products Only 1.1 This limited warranty covers defects in materials and workmanship in this product. 1.2 Should warranty service be required, proof of purchase must be presented to the Company. The serial number on the product must be clearly visible and not have been tampered with in any way whatsoever.
- Page 18 ALF-SUK4T 1.9 A 7 (seven) year limited warranty is given on the aforesaid product where used correctly according to the Company’s instructions, and only with the use of the Company’s components. 1.10 The Company will, at its sole option, provide one of the following three...
- Page 19 ALF-SUK4T months of delivery. 1.16 If delivery is not refused, and the Customer does not notify the Company accordingly, the Customer may not reject the goods and the Company shall have no liability and the Customer shall pay the price as if the goods had been delivered in accordance with the Agreement.
Need help?
Do you have a question about the ALF-SUK4T and is the answer not in the manual?
Questions and answers