2. PCG-V505 Series Disassembly
Step 3: Lift the hinge cover and move the wireless LAN antenna cables from under the hinge bracket as illustrated
in Figure 2-27. The panel can now be lifted out.
REMOVE HINGE COVER AND
PULL ANTENNA CABLES
FROM UNDER HINGE
BRACKET
HINGE COVER
FIGURE 2-27 LCD PANEL REMOVAL (step 3)
Step 4: Lift the tape off both ends of the LCD cable and unplug from the panel. Use caution when unplugging this
cable as the wires are very delicate. The panel can now be swapped with a replacement unit.
REMOVE TAPE
FROM BOTH ENDS
OF LVDS CABLE
FIGURE 2-28 - LCD PANEL REMOVAL (step 4)
31