Colorlight BTLSMINI Operating Instructions Manual page 10

Getting started
Warnings and safety instructions
Package contents
Functions
Description of parts (under the unit)
Charging
Getting started
• Take the device out of the box.
• Remove all packaging materials from the product.
• Place the packaging inside the box and either keep or dispose of properly in compliance
with the waste sorting instructions shown on the product packaging.
Warnings and safety instructions
You must read and understand all instructions before using this device. The warranty will not
apply if damage is caused by failure to follow the instructions.
1. Never remove the casing from this device.
2. Never place this appliance on other electrical equipment.
3. Protect the power cord from being walked on or pinched, particularly at the
plugs, sockets, and the point where it exits the appliance. Make sure that
the power voltage corresponds to the voltage shown on the rating plate
at the rear of the appliance. Always pull the plug from the socket when
disconnecting from the mains. Never pull on the cord. Ensure you have
completed all the other connections before connecting the plug.
4. Only use attachments/accessories that are recommended by the
manufacturer.
5. Leave all repairs to the device to qualified repairers. A repair is needed when the appliance
has been damaged in any fashion, and in particular:
- if the power cord is damaged;
- in the event of a liquid spill or objects being inserted into the device;
- if the device is exposed to rain or humidity;
- if the device does not operate normally;
- or if the device has been dropped.
6. The type plate is located on the bottom of the device.
7. Never block the air vents.
8. Ensure you have sufficient stable space around the appliance for ventilation.
9. This appliance must be used in a moderate climate, away from direct sunlight, naked
flames or heat, heating appliances, cookers or any other appliance (including amplifiers)
that generates heat. Do not install near a heat source.
10. The batteries (battery pack or inserted batteries) must not be exposed to excessive heat,
such as sunshine, fire, etc.
11. Always unplug the device before cleaning it. Never lubricate any part of this appliance.
10 Connection
10 Technical specifications
12 Protecting the environment
12 Additional information
12 Declaration of conformity
12
- EN 10 -
12
13
14
14
14