Advertisement
Safety Instructions
Positioning
Please ensure that you have positioned your umbrella
according to the installation instructions that are supplied
upon supply of your ground fixing. If you are using portable
bases please ensure they are also correctly positioned so as
to avoid any obstructions that can cause damage to your
umbrella.
Electrical Supply
If you have chosen an umbrella that has heat and light then
you will almost certainly require a 32amp supply on a c type
breaker. We recommend you contact a qualified electrician
so that they can advise you on the best course of action to
prepare for your umbrella. Your umbrella will have 3 or 5
cables coming out from the base of the mast and these
must be connected with a waterproof connector.
Installation
Once you are happy with the positioning and you have the
electrics in place, you are now ready to stand up your
umbrella. This should be done by two or three competent
persons depending on the size of the umbrella by slowly
raising it up. Our extreme models are generally built on site
due to their size and weight.
Advertisement
