Download Print this page

Advertisement

Quick Links

USER GUIDE
Aztec Original
Aztec Extreme
Aztec Off-Set

Advertisement

loading

Summary of Contents for Aztec Original

  • Page 1 USER GUIDE Aztec Original Aztec Extreme Aztec Off-Set...
  • Page 2: Safety Instructions

    Safety Instructions Positioning Please ensure that you have positioned your umbrella according to the installation instructions that are supplied upon supply of your ground fixing. If you are using portable bases please ensure they are also correctly positioned so as to avoid any obstructions that can cause damage to your umbrella.
  • Page 3: General Information

    General Information Weather If severe weather is forecasted we recommend that you close your umbrella and correctly strap it up using an Aztec wrap strap only. If you have your umbrella on a portable base extra care must be taken.
  • Page 4 Warranty The warranty is go the original buyer and is not transferable. The warranty is for 2 years from the date of delivery. The warranty covers all fixings, arms, gearbox and mast.
  • Page 5 - Top Hat with fixings Opening your umbrella - Remove your cover bag if you have one - Remove your Aztec wrap strap - Ensure the area is clear and then use your crank handle to open the umbrella until you hit resistance - Remove the crank handle If your umbrella does not open upon the first turn of the...
  • Page 6 General Information Closing your umbrella - Insert the crank handle and slowly turn the handle until the umbrella is in the closed position. - Pull out the fabric (unfurl) from between the closed arms and wrap fabric around the umbrella. - Secure the fabric with your wrap strap.
  • Page 7 Your umbrella LED Lighting The lighting consists of 4 LED strips encased in solid casing, attached to the underside of the corner arms. As standard the LEDs are available in cool white, but we can supply warm white if required. Heating The heating kit consists of 4 x 1kw or 1.5kw heaters attached to the underside of the lower fixing ring, via fold...
  • Page 8 Connecting your umbrella... Cabling Your umbrella will be wired with either 3 or 5 cables depending on what kit you have chosen. Thick Brown (heaters) Thick Blue (heaters) Earth Thin Brown (lighting) Thin Blue (lighting) The umbrella cables should be connected to the feed from the building via a suitable waterproof connector and this connection should be done by a competant fitter.
  • Page 9: Other Accessories

    Other Accessories Side Curtains & Guttering Generally these will be attached via our unique lock and latch velcro and this is only available on umbrellas with vlances. Once the umbrella is in the open position you simple attached one side of the curtain to the inside of the vaances and slowly mo along the valance until the entire length is attached.
  • Page 10 Please feel free to contact your supplier if you have any questions.

This manual is also suitable for:

ExtremeOff-set