Set Up The Remote; Remote Control Features; Sound Modes - Polk Mono Signa S4 Quick Start Manual

5
Set up the subwoofer
1
6

Set up the remote

1
Setup is now complete!
Watch TV or play a movie and adjust the sound bar volume and other
settings as desired. You can use the sound bar top panel, the sound bar
remote, or your TV remote to change the settings. For more information,
refer to the online manual.
polkaudio.com/signas4

Remote Control Features

Power
AUX select
TV select
Volume adjust
Movie mode
Voice Adjust™
Polk SignaS4_QSG for NA_210730.indd Polk SignaS4_QSG for NA_210730.indd 2 2
2
2
Mute
Bluetooth select
Bass adjust
Night mode
Music mode
3

Sound Modes

Movie Mode
Enhances audio reproduction in TV and
movies.
Night Mode
Reduces bass and volume dynamics while
improving voice intelligibility for low-volume
listening.
Music Mode
Enhances audio whenever you're listening to
music, or watching TV or movies that have
music playing in them.
VOICE ADJUST™
Isolate and adjust the voice channel level to
reproduce clear, crisp dialogue.
1. For best performance, place the
subwoofer on the same wall as the
TV, no more than 30ft (10m) from
the sound bar.
2. Plug the power cable into the
subwoofer and into a wall outlet.
1. Turn the remote to view the back.
2. Open the back cover by sliding
the bottom portion in the arrow
direction.
3. Insert the two AAA batteries into
the remote and replace the cover.
2021/07/30 2021/07/30
2
13:53:24 13:53:24