Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Insta 138
Summary of Contents for Insta 138
- Page 1 Operation and Maintenance Manual MNL90138 03/01/05 MODEL 138 MODEL 138...
- Page 3 Your model 138 machine will have a long trouble-free life. Read this manual. Keep it with Specifications your machine; it's your key to proper operation and lasting service.
- Page 4 FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY Operation Operation Timer/Temperature Control 1. It is recommended that you review the "How to Apply Instructions" (in our Product Information Sheet) before beginning heat sealing operations. 2. Turn the power on by pressing the POWER button on the controller.
-
Page 5: Additional Notes
FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY ADDITIONAL NOTES: Temperature NOTE Fahrenheit/Centigrade (Celsius) Conversion The temperature controller can be programmed to display either °F or °C. To change: Press the MODE button until the temperature is displayed, then push and hold the SET button for 10 seconds. - Page 6 FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY International Symbols Preventive Maintenance Suggestions The IGS heat seal machines are relatively maintenance free. For long, trouble-free life, the Power Off following preventive maintenance should be followed: 1. Do not heat seal items such as buttons, pins, snaps, or zippers which tend to cut Power On the silicone rubber pad or scratch the...
- Page 7 FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY 4. The pad and metal must be thoroughly dry Replacement of Silicone Rubber Pads and clean, before starting the bonding operation. 1. Make sure heat platen is cool. 5. Apply adhesive sealant to the metal platen. 2.
- Page 8 12 Vac TEMPERATURE 12 Vac (BLUE-EUROPE) INPUT GN/YEL CONTROL GREEN TIMER SENSOR (GN/YEL-EUROPE) START BLUE 470 F TEMP LIMITER MICRO GN/YEL SW\ITCH GREEN BROWN BROWN HEAT PLATEN 12 Vac GN/YEL 230 Vac BLUE 138 Wiring Rev D - 03/01/05 TRANSFORMER...
- Page 10 MODEL MODEL NO PART NAME 120V AC 230V AC SHROUD, UPPER PLATEN MPS90000 MPS90000 SCREW, PAN HD #10x1.0 LG PHIL SH METAL MPSS143 MPSS143 INSULATION, FIBERGLASS 15X20 MPSP254 MPSP254 STRAIN, RELIEF CABLE MPS90014 MPS90014 INSULATORS, SPACER (4/SET) MPSI089 MPSI089 POST, GUIDE MPP90000 MPP90000 SENSOR, TEMP.
- Page 11 MODEL MODEL NO PART NAME 120V AC 230V AC 56B POWER CORD (GREAT BRITAIN) MPPW203 58 SCREW, PAN HD 8-32UNC x 1.00 LG MHSP8321 MHSP8321 59 WASHER, FLAT #8 (.164 I.D.) MHWSAE8 MHWSAE8 60 WASHER, #8 INTERNAL LOCK MHWLIT8 MHWLIT8 63 OVERLAY, PRESSURE ADJUSTMENT MPL90004 MPL90004...
- Page 12 ® 13925 E. 166th Street • Cerritos CA USA 90702-7900 Service: (800) 426-3609 • (562) 861-2566 • Sales: (800) 421-6971 (562) 404-3000 • Fax: (562) 404-3010 • http://www.instagraph.com...
Need help?
Do you have a question about the 138 and is the answer not in the manual?
Questions and answers