Nswering C Alls; Charge/In Use Indicator On Base; Making A Call; Answering Calls - GE 27950EE1 User Manual

From the Answer System Menu:
1. Press the CID/VOL ( + or - ) button to scroll to the Security code
submenu.
. Press MENU button to show the current security code on the
display.
. Use the number keys to enter your new -digit security code.
The default setting is 1 2 3.
. Press MENU button to save the setting.
Telephone Operation

Charge/In Use Indicator on Base

The charge/in use indicator on the base will flash to alert you to
an incoming call, during paging, or registration. The indicator will
remain lit when a handset is in the base charging or when the line
is in use.

Making a Call

1. Press the TALk/END button. Dial the desired number.
- OR -
Dial the number first, then press the TALk/END button.
. When finished, press the TALk/END button or put the handset
back into the base cradle to hang up.
NOTE: If you want to delete the pre-dial number you
entered, press the MUTE/ringer on/off button until all of the
digits are erased.

Answering Calls

1. When the phone rings, press the TALk/END button.
- OR -
Press the SPEAkER button on the base.
6