Parameter Display (Disp); Date And Time; Season; Vmc Profile (The Profile According To The Previous Settings Is Displayed) - Fantini Cosmi CH193VMC Instructions For Use Manual

CH193VMC
CENTRALISED CONTROL FOR VMC UNITS

6 - PARAMETER DISPLAY (DISP)

Pressing the DISP key allows you to display certain parameters set according to the active operating program.

6.1 - DATE AND TIME

15:25 15-09-20
DAY 3
23.0
1
[ AUTO ]
SEL PROG
TEMP
15:25 15-09-20
3
DAY
2
ENTER

6.2 - SEASON

15:25 15-09-20
3
DAY
23.0
1
[ AUTO ]
SEL TEMP PROG
15:25 15-09-20
DAY 3
2
ENTER
6.3 - VMC PROFILE
15:25 15-09-20
3
DAY
23.0
1
[ MAN ]
SEL TEMP PROG
15:25 15-09-20
DAY 3
2
ENTER
PRESS
The date and time are displayed.
DISP
OFF
DISP
PRESS
ENTER
PRESS
The season is displayed.
DISP
DISP OFF
WINTER
PRESS
UP TO
(THE PROFILE ACCORDING TO THE PREVIOUS SETTINGS IS DISPLAYED)
PRESS
DISP
DISP OFF
VMC = V1
PRESS
UP TO
PRESS
ENTER
ENTER
PRESS
ENTER
ENTER
Note:
With integration active and ventilation
in MAN will be displayed:
■ VMC = INT
With integration off and ventilation in
MAN will be displayed:
■ VMC = V1
With ventilation in AUTO in both
cases the set ventilation programme
is displayed.
20