Removing The Filter - Technicolor - Thomson 42WB02S Service Manual

4. Removing the Mask and the J5 cable from PCB

5. Removing the filter

Unscrew 10 screws from mask (Specification of screw driver is 15± 2 kg), then remove four angles that hold the PDP filter. (Be
careful: Please do not bump or scrape when handling the PDP filter.)
Before putting panel back clean PDP filter make sure it's free from dust.
Unscrew 3 screws and remove control board
J5
Fig. 5
Fig. 6
3 screws
Fig. 7
8 First issue 06 /03