Adding Batteries To Your Device - Activ8rlives Body Analaser Manual

Adding the Batteries
Your Activ8rlives Body Analyser Smart Scales uses four AA 1.5V alkaline batteries, which are supplied. These are
non-rechargeable batteries and no attempt should be made to recharge these.
Open the battery compartment on the rear side of the device and insert 4 x AA batteries in the direction indicated.
Replace the cover and the Display will illuminate. The device will go into sleep economy mode within 30 seconds if
not being used. If it is overloaded, it will also power off. Also a faulty operation would make it power off.
Remove the batteries if you are planning to store the device for a long period of time. We hope you use your device
for many years of course, but long periods of storage with the batteries in place may damage the device and will
cause the batteries to discharge.
Replace the set of batteries (4 x 1.5V AA) in the right
direction when the batteries are exhausted, indicated by
"LO" on the Display. No data
memory, so exchange of batteries will not affect data
storage.
Cleaning and Disinfection
It is recommended that you use a soft, microfiber cloth for cleaning. Don't use harsh cleaning products as these
will cause damage to your
LCD display or the Film as this may damage it.
Never immerse the Activ8rlives
Do not use or store in places which are damp or have a high humidity (e.g. steamy bathrooms).
is stored on the device in
Activ8rlives Body Analyser. Don't allow sharp objects to scratch the screen of the
Body Analyser Smart Scales central unit in water or disinfecting solution.
12