Alarm.Com ADC-SG130 Instructions

View the Wi-Fi name (SSID) and password of the ADC-SG130

Important: If you do not see the options outlined on this page, you may not have the required permissions to complete
this action. Please contact your Dealer Administrator for more information.
Users can view the Smart Gateway's Wi-Fi password using the Partner Portal and MobileTech app. The Wi-Fi password
is needed when connecting a video device to the Smart Gateway using AP mode.
To connect a video device to the Smart Gateway using AP mode, follow the AP mode procedure for the video device
and connect it to the Smart Gateway's network. For more information about connecting a video device using AP mode,
see the video device's installation guide in
Note: Using WPS is recommended when connecting a video device to the Smart Gateway. For more information,
see Connect a video device to an ADC-SG130 using Wi-Fi Protected Setup
To view the Wi-Fi name (SSID) and password using the MobileTech app:
1. Log into the MobileTech app.
2. Find the customer account.
3. Tap Equipment.
4. Tap Access Points.
5. Tap the desired Smart Gateway.
6. The Wi-Fi name appears in the SSID field.

7. To view the password:

a. Tap .
b. To hide the password, navigate away from the page.
To view the Wi-Fi name (SSID) and password using the Partner Portal:
1. Log into the Partner Portal.
2. Find the customer account.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Smart_Gateway_(ADC-SG130)/Vie...
Video Devices.
(WPS).
Updated: Mon, 14 Jun 2021 20:49:32 GMT
1