Advertisement
Quick Links
COMPONENTS IN THE PACKAGE
INSTALLATION
Step 1
Cut and open the end of the plastic wrap on the
main pole and remove the plastic cover from
bottom tip.
Step 3
Install the half form into the stand pole.
THE HALF FORM STAND
Main Pole
Step 2
Install the main pole onto the base stand.
•
Release two locking knobs from the base stand.
•
Insert the bottom tip of the pole into the hole of the base stand.
Step 4
Hold the bottom part of aluminum pole and
turn the half form until the half form is locked
firmly into the stand.
HOW TO INSTALL
Base Stand
1 / 2
CAUTION
Remember to fully insert the pole below the
grey painted area.
• Tighten two locking knobs.
• Dispose the plastic wrap on the main pole.
( v1.0 )
Advertisement
Related Manuals for Alvanon AlvaForm
Summary of Contents for Alvanon AlvaForm
- Page 1 ( v1.0 ) HOW TO INSTALL THE HALF FORM STAND COMPONENTS IN THE PACKAGE Main Pole Base Stand INSTALLATION Step 1 Step 2 Cut and open the end of the plastic wrap on the Install the main pole onto the base stand. main pole and remove the plastic cover from •...
- Page 2 APPLICATIONS CAUTION Do not step on the pedal before installing the Press down on front brake to lock the mannequin in order to prevent the user from wheel in place. being injured by the sudden rise of the pole. Hold the mannequin with both hands while lifting up / lowering down the mannequin by stepping on the pedal.
Need help?
Do you have a question about the AlvaForm and is the answer not in the manual?
Questions and answers