Advertisement
COMPONENTS IN THE PACKAGE
INSTALLATION
To hold the bust form
Screw the center shaft clockwise. After installing the shaft, a bust form can be placed on the stand and and be rotated.
To hold the infant form
Screw the standing pegs in clockwise. After installing
the standing pegs, infant forms up to Toddler
4T(100cm) can be used on the table top stand.
•
Screw the stand peg.
•
Find out the stand peg measurement
•
Adjust the position of the stand peg
(i.e. half distance-48mm).
HOW TO INSTALL AND USE
Table top stand
THE TABLE TOP STAND
Center shaft
Wrench
1 / 2
2 standing pegs
( v1.0 )
Advertisement
Table of Contents
Related Manuals for Alvanon Alva Form
Summary of Contents for Alvanon Alva Form
- Page 1 ( v1.0 ) HOW TO INSTALL AND USE THE TABLE TOP STAND COMPONENTS IN THE PACKAGE 2 standing pegs Center shaft Wrench Table top stand INSTALLATION To hold the bust form Screw the center shaft clockwise. After installing the shaft, a bust form can be placed on the stand and and be rotated. To hold the infant form Screw the standing pegs in clockwise.
- Page 2 • Lock the standing pegs with the wrench. • Place form onto stand. CAUTION Please do not insert the forms which exceed Toddler 4T(100cm) , otherwise, the stand will become unstable. CAUTION Please remove the hanging pole before inserting the form. CAUTION Table top stand can be scratched by hard objects such as watches.
Need help?
Do you have a question about the Alva Form and is the answer not in the manual?
Questions and answers
how do we use the half scales
To use the half scales of Alvanon Alva Form:
1. Install the stand:
- Remove plastic from the main pole.
- Insert the pole into the base stand and tighten the locking knobs.
- Press the front brake to lock the wheel.
2. Attach the form:
- Insert the half form onto the pole.
- Turn the form until it locks firmly.
- Ensure the pole is inserted below the grey painted area.
3. Use for draping:
- Half-scale forms require less fabric and paper.
- Ideal for learning and practicing draping techniques.
- Focus on fabric positioning and pinning.
4. Customization:
- Alva Forms can be customized even at half scale.
5. Safety:
- Do not step on the pedal before installation to avoid injury.
- Hold the mannequin with both hands when adjusting height.
This answer is automatically generated