Preheat
1.
Insert the cooking basket into the air fryer.
2.
Press 1 (to cook in left basket) or 2 (to cook in right basket).
The Air Fry button blinks and the display shows the default time
and temperature.
3.
If you want to select a smart programme other than Air Fry, press
the button for the programme you want to use.
The default time and temperature are displayed for that smart programme.
4.
If you want to adjust the cooking time, press Time and use the
Control Dial to increase or decrease it.
5.
If you want to adjust the cooking temperature, press Temp and
use the Control Dial to increase or decrease it.
There is no preheating time for the Reheat smart programme.
6.
Press Start to begin. The status bar shows Preheating.
7.
When the cooker reaches the target temperature, the display
shows Add Food.
Note: Add Food applies to Air Fry, Roast, Bake and Grill only.
Cook
1.
Remove the cooking basket and place your food into the basket.
2.
Insert the cooking basket into the air fryer.
3.
Cooking begins and the cooking countdown timer starts.
Turn
1.
Part way through the cooking cycle the display shows Turn Food.
This will not display for the Bake, Grill or Dehydrate smart programmes -
there is no need to turn the food partway through these cooking cycles.
2.
Remove the basket and carefully turn, flip, or rotate your food.
If you do not remove the basket after Turn Food displays, cooking will
proceed after 10 seconds.
3.
Insert the basket again. Cooking continues.
7
Get started
Need help?
Do you have a question about the VORTEX PLUS DUAL and is the answer not in the manual?