Advertisement
Advertisement
Table of Contents
Related Manuals for Artist Guitars BSK20V2
Summary of Contents for Artist Guitars BSK20V2
- Page 1 BSK20V2 MANUAL...
-
Page 2: Important Safety Instructions
BKS20V2 IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep this instruction manual. • Pay close attention to all the warnings. • Follow all instructions. • Do not use near water. • Do not, under any circumstance, expose to any dripping or splashing liquid. - Page 3 BKS20V2 • Excessive sound pressure from earphones and headphones can cause hearing loss. • No naked flame sources, such as candles should be placed on or near the apparatus • If needed, lift amplifier with care. Use a trolley as needed, but caution is advised to prevent the trolley tipping over.
- Page 4 BKS20V2...
- Page 5 It can be used for Acoustic, Electric, or even Bass guitars. This is one of the many great value amps designed by the team at Artist. If you want to learn more about Artist Guitars, head to our website! AU: artistguitars.com.au UK: artistguitars.co.uk NZ: artistguitars.co.nz...
-
Page 6: Front Panel
BKS20V2 FRONT PANEL 1. Channel 1 Input This is where you plug in your guitar or microphone. The two inputs refer to the level of gain. The High input is useful if you want a louder, higher gain sound. The Low input is useful if you want a quieter sound. This input is normally used for Microphones. - Page 7 BKS20V2 5. Reverb Channel Selector This switch controls which channel has reverb. Pushed in, channel 1 has reverb, and when it’s clicked out again, channel 2 has reverb. 6. Channel 2 Input This is where you plug in your guitar for Channel 2. Channel 2 Gain Control This knob controls the preamp gain for Channel 2.
- Page 8 BKS20V2 13. Master Reverb Control This knob controls the amount of reverb present in the output. This con- trols reverb for both channel 1 and 2, depending on which position the reverb channel selector switch is in. As the knob is turned clockwise towards 10, there will be more reverb in the guitar tone.
-
Page 9: Technical Specification
BKS20V2 TECHNICAL SPECIFICATION Output RMS: 20 watts Inputs: • Instrument: 1/4 inch high input jack • Mic: 1/4 inch low input and 1/4 inch high input Speaker: High quality 6.5 inch speaker with 1 inch soft dome tweeter Additional Features: •... -
Page 10: Additional Information
BKS20V2 ADDITIONAL INFORMATION • This amp is designed for buskers, but does not mean it cannot be used in other ways • If you have any questions or concerns, don’t hesitate to reach out to us and we will do all we can to assist you. Australia United Kingdom email: sales@artistguitars.com.au...
Need help?
Do you have a question about the BSK20V2 and is the answer not in the manual?
Questions and answers