GE Profile PSSF3RGZ Owner's Manual And Installation page 22

Inserting the door panels.
Top Trim
Side
Trim
Side
Trim
Bottom Trim
22
Install the Side Trim.
Side trim pieces are tucked inside the
refrigerator door handle.
Do not remove the protective film on
the outside of the Side Trim until
it is installed.
1. Insert the side trim under
the top trim.
Insert the side
trim to the top
trim as arrow
shows.
Once you insert the side trim under
the top trim, make sure there is no
gap between the side trim and the
top trim looking from the front of
the refrigerator.
2. Hold the side trim against
the side door.
Make sure the side trim is aligned to
the door during installation.
Some side trims have pieces of adhesive
tape. If so, peel off the backing so the
tape can be attached during trim
installation.
3. Insert the side trim to the bottom trim
or bottom panel.
Insert the side trim
to the bottom trim
as arrow shows.
Once you insert the side trim
under the bottom trim or panel,
the side trim will fit to the door.