Advertisement
CYL-V series cylinder storage cabinets manual, 0111
Step 2:
Fasten the left (4) a nd right (5) rea r panels together. Lay the re ar/back weldments next to ea ch other with t he
panel labeled "LB" to the left of panel "RB". Slide a flat washer onto ten bolts (14); feed the bolts through the slots in the
inner rails of both panels as shown in the drawing below; then through the corresponding holes in the formed top support
(12) and locking plates (13). Slide another flat washer followed by a lock nut (16) onto the free end of each bolt.
Outside
LB
RB
Inner rail
Inside
Inner rail
Page 7 of 13
Copyright 2011 Vestil Manufacturing
Advertisement
