How To Use - greenair IMMUNO 360 Quick Start Manual

How to use

C
Nozzle
D
LED
1. Before using, make sure the unit is charged. To charge, first plug
the adapter into the unit*, then into the wall. When charging, a red
light will appear in front of the
disappear will the unit is fully charged. Please be reminded, that the
adapter is at the bottom of the handle on the left side of the unit.
* The adapter port is located on the left side of the diffuser at the
E
bottom of the handle when looking from the handle to the front of the unit.
2. Use the switch at the top to turn the unit on. Slide
A
forward to turn on the unit and slide
the unit.
3. Pull the trigger and spray on your desired surface.
B
Please wait for the unit to stop misting before placing on surfaces
such as a table. Please be reminded that the unit will continue to mist
for 5-10 seconds before it fully stops misting.
4. When it starts misting, you'll notice the blue light on the
and the bright white
see the dark spaces/surfaces when spraying.
power switch. This red light will
A
LED below the
D
On
A
Off
switch backwards to turn off
A
nozzle is enough to help you
C
Switch
B
Trigger
E
Adapter Port
switch
A
nozzle
C