Advertisement
Quick Start Guide
Before Use
Adapter
Port
How to remove the water tank
1
Unlock the latch by
sliding forward to the
front of the unit.
How to connect the water tank
1
Return water tank to unit.
You will hear the water tank
snap into place.
Before using, make sure the unit is
charged. To charge, first plug the
adapter into the adapter port, then
into the wall.
2
Latch
Turn release 45
clockwise.
2
Turn the locker ring 45
counterclockwise to lock.
Using warm water, fill the water tank to just
below the opening. Add your favorite
compatible solution as directed.
3
Release
o
Lift the unit off of the
water tank
3
6
lock
Lock the latch by sliding it
o
backwards towards the
handle before turning the
unit on.You will hear the
latch click into place.
Water
Tank
Latch
Advertisement
Table of Contents
Summary of Contents for greenair IMMUNO 360
- Page 1 Quick Start Guide Before Use Before using, make sure the unit is charged. To charge, first plug the adapter into the adapter port, then Water into the wall. Tank Adapter Port Using warm water, fill the water tank to just below the opening.
- Page 2 How to use Switch Nozzle Trigger Adapter Port 1. Before using, make sure the unit is charged. To charge, first plug the adapter into the unit*, then into the wall. When charging, a red light will appear in front of the power switch.
Need help?
Do you have a question about the IMMUNO 360 and is the answer not in the manual?
Questions and answers