GE Profile PSB48L Dimensions

TM
PSB48LSR – GE Profile
with Electronic Dispenser
Dimensions (in inches)
25-3/8" Case Depth
47"
Case Width
*81-3/4"
at Rear
48" Frame-to-Frame
Depth Including
Handles 26-7/8"
Specification Revised 1/06
210322
ENERGY STAR 48" Built-In Stainless Side-By-Side Refrigerator
™ ®
*Shipping height
*The front height may be
adjusted from 83-1/2" to
84-1/2" by adjusting
front and rear leveling
legs a maximum of 1" .
*84" From
Floor to
Top Frame
Stainless Steel Wrapped Refrigerators
Stainless Steel wrapped refrigerators have wrapped doors
and grille panels, and beveled edges. These models are
shipped ready for installation.
Listed by
Underwriters
Laboratories
R
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers'
standards.
Product Clearances
These refrigerators are equipped with a 2 position door stop.
The factory set 130° door swing can be adjusted to 90° if
clearance to adjacent cabinets or walls is restricted.
130° Door Swing
A
Models
48" 13-7/16"
Allow minimum clearances for Freezer door (Dimension A) and
Fresh Food door (Dimension B) for a full 130° door swing and
to allow for drawer removal.
Four inch (4") minimum clearance is required when door swing
is adjusted to 90°. If the 90° door stop position is used, drawer
access is maintained, but drawer removal is restricted.
R
For answers to your Monogram,
As an ENERGY STAR
®
partner, GE has determined GE appliance questions, visit our website at
®
that this product meets the
ge.com or call GE Answer Center
ENERGY STAR guidelines
800.626.2000.
for energy efficiency.
90° Door Swing
B
23-7/8"
Behind
Frame
C
D
A B C D
18-9/16" 28" 4"
GE Profile or
® ™
service,
®
D