protech PS-470/N Operating Instructions Manual
Optical fiber transmission system
Hide thumbs
Also See for PS-470/N:
- Operating instructions manual (28 pages) ,
- Operating instructions manual (27 pages)
Related Manuals for protech PS-470/N
Summary of Contents for protech PS-470/N
- Page 1 Optical Fiber Transmission System PS-470/N CAMERA ADAPTOR PS-570/N BASE STATION Operating Instructions Before operating the system, please read this manual thoroughly and keep it for future reference.
- Page 2 Always keep this manual available for future reference. Be sure to follow the safety information to prevent injury to the user and other persons, as well as damage to property. The following descrives the meaning of safety symbols and signal words. Indicates a potentialy hazardous operation that could result in death Warning or serious injury to the user. ■ If something unusual happens ; for example, it emits smoke, an unusual odor or sound, turn the power switch off. ■ If it is dropped or subjected to excessive shock or is damaged, turn the power switch off. ■ If water or any other fluid enters it, turn the power switch off. ■ If a foreign body enters it, turn the power switch off. ※Failing to do so may cause overheating, fire, electric shock, injury or malfunction. ※Contact the shop of purchase or PROTECH Service center. Indicates a potentialy hazardous operation that could result in minor Caution or moderate injury to the user or damage to the property. ■Do not place any containers of fluids or any metal objects on it. Prohibition Doing so may cause overheating, fire, electric shock, injury or malfunction. 禁止 ■Do not insert or drop objects into an opening such as vent hole in it. Doing so may cause overheating, fire, electric shock, injury or malfunction. Prohibition 禁止 ■Do not wet it with fluids such as water, perspiration or seawater. Keep water away Doing so may cause overheating, fire, electric shock, injury or malfunction. 水ぬれ禁止 Take care especially when using in rainy or snowy weather or at the waterside. ■Do not set up or leave it wherever water or any other fluid is used. Keep water away Doing so may cause overheating,fire, electric shock, injury or malfunction. 水場禁止 ■Do not disassemble, modify or repair it. Doing so may cause overheating, fire, electric shock, injury or malfunction. 分解禁止 For inspection, overhaul or repair, contact the purchase shop or PROTECH Service center. PS-470/N and PS-570/N are class 1 laser products. Do not directly look into the Optical fiber connector, since the laser light is emitted from its tips. Ensure that the dust cap is placed over the Optical fiber connector when this equipment is not in use.
-
Page 3: Table Of Contents
Contents Optical Fiber Transmission System PS-470/N PS-570/N Names and Functions of Parts - - -- -- -- - -- -- - -- -- -- - -- -- - -- -- -- - -- -- - -- -- -- - -- -- - -- -- -- - 4 PS-470/N - - -- -- -- - -- -- - -- -- -- - -- -- - -- -- -- - -- -- - -- -- -- - -- -- - -- -- -- Main panel / Rear panel... - Page 4 Names and Functions of Parts PS-470/N CAMERA ADAPTOR Main panel / Rear panel Main panel ① INTERCOM CAMTAP AUDIO-PGM 1 ② H.P VOL ③ DC 15V OUT (MAX.3.5A) SIGNAL INDICATOR ④ ⑤ CAMTAP ⑱ ⑲ DC 15V OUT (MAX.3.5A) Rear panel ⑯ ⑰ ⑱ ⑲ ⑳ OPTION...
- Page 5 CAMERA ADAPTOR PS-470/N Main panel ① INTERCOM AUDIO PGM 1 ⑱ V-mount Camera Interface Intercom PGM 1 Audio Volume Control Used to mount the Camera Adaptor to the camera to supply the DC power. Adjusts the volume level of the PROGRAM audio which is mixed to the INTERCOM line. ⑲ V-mount Battery Interface (Battery Holder) Used for connection with the V-mount Li-ion battery (SONY type), to operate the Camera Adaptor by ② INTERCOM H.P LEVEL DC power. Intercom Headset H.P Volume Control Adjusts the volume of the headphone of the INTERCOM HEADSET. ⑳ OPTION LAN Connector(RJ45) ③ INTERCOM HEADSET MIC ON/OFF Use to connect to the LAN. (Optional) Intercom Headset Microphone Switch Switchs the intercom headset microphone on/off. ④ SIGNAL INDICATOR Signal Status Indicator LED Indicates the signal status, the connction of the connectrs or the input/output of the signals. ⑤ CAMTAP / DC 15V OUT (MAX.3.5A) DC 15V Output Connector CAMTAP x2...
- Page 6 CAMERA ADAPTOR PS-470/N Connector panel / Front panel Connector panel ⑯ ⑫ ⑬ REMOTE L REMOTE ⑰ ⑦ SDI OUT THROUGH OUT RET OUT SDI IN ⑥ ⑧ TC IN TC OUT ⑩ ⑪ REF OUT TALLY OUT ⑨ ⑭ ⑮ ⑲ ⑱ Front panel ⑯ ⑰ ⑱...
- Page 7 CAMERA ADAPTOR PS-470/N Connector panel ⑫ REMOTE ⑥ SDI IN REMOTE Connector (8P female) SDI Input Connector(BNCx1) For the SONY with the 8P remote control. Used to input the SDI signal from a camera. The SDI signal input to SDI IN connector can be output by loop through. Compatible with 3G-SDI ⑬ REMOTE L REMOTE L Connector (2.5φ Mini jack) ⑦ SDI OUT SDI Through Output Connector (BNC) For LANC. (SDI IN Through output) Outputs the SDI IN input as is. (Through output). ⑭ TALLY OUT TALLY Signal Output Connector (BNC) Use to output the TALLY signal. ⑧ RET OUT It outputs the TALLY signal when the TALLY signal Return SDI Output Connector (BNC) is input to the INTERCOM / TALLY IN connector (D-sub 25P) of the base station. Outputs the return SDI signal input to the RET IN connector of the Base Station. Compatible with 3G-SDI ⑮ INTERCOM H.P Intercom Headset Connector (XLR 4P) ⑨ REF OUT Used to connect the INTERCOM HEADSET. Reference Signal Output Connector 1 MIC(G) (BNC) HEADSET (XLR 4P) 2 MIC(H) Pin assignment...
-
Page 8: Names And Functions Of Parts
Names and Functions of Parts PS-570/N BASE STATION Front panel PROTECH OPTICAL FIBER BASE STATION POWER SIGNAL INDICATOR INTERCOM H.S H.P LEVEL PRG 1 ② ① ⑤ ④ ③ ⑥ ⑦... -
Page 9: Ps-470/N
① POWER ON/OFF POWER Switch Turns on /off the power. When it is turned on the DC power is supplied to the camera adaptor PS-470/N. ② INTERCOM H.S (XLR 4P male) INTERCOM HEADSET Connector Connects the intercom headset the DL-500. INTERCOM H.S (XLR 4P) MIC(G) Pin assignment MIC(H) H.PHONE(G) H.PHONE(H) - Page 10 PS-570/N BASE STATION Rear panel ⑨ ⑩ ⑬ ⑭ ⑮ ⑪ ⑮ ⑯ ○ SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) DC IN (10.8V-15V) TC IN TC OUT REMOTE L REMOTE 2 AC IN (85V-220V) (OP) TALLY / INTERCOM PRO INTERCOM ENG(OP) NIPPON VIDEO SYSTEM CO., LTD MADE IN JAPAN...
- Page 11 BASE STATION Rear panel ⑭ ⑧ OPT REMOTE L (2.5φ Mini Jack) SMPTE Optical Fiber Cable Connector LANC connector Used to connect to the LANC remote controller. Connects to the Optical Fiber Camera Adaptor with an optical fiber cable. Be sure to put the cap on the SMPTE optical fiber cable connector when the cable isnʼt connected. LAN(OPTION) (RJ45)) ⑮ Option Connector ⑨ SDI OUT 1 (BNCx2) SDI OUTPUT Connectors (2 outputs) ⑯ REMOTE 2 (12P) REMOTE 2 Connector Outputs the SDI signal input to the PS-470/N SDI IN 1 connector. NC. Optional use. Compatible with 3G-SDI. ⑰ TALLY / INTERCOM (D-Sub 25P) ⑩ REF IN (BNC) TALLY / INTERCOM Signal Connector REFERENCE Signal INPUT Connector Used for connection to INTERCOM line and Used to input the reference signal from the external input of TALLY sigal. equipment. TALLY / INTERCOM (D-Sub 25P) Pin assignment 1 14 PROD OUT + RET IN (BNC) ⑪...
- Page 12 S-570/N BASE STATION P Rear panel ⑲ AC IN (85V-220V) AC Power Supply Connector Connects to the AC power supply with the supplied AC power cable. ○ DC IN (10.5V-15V) (XLR 4P male) DC Power Input Connector Connects to the external DC 12V(10.5V-15V) power supply. Then the DC power cannot be supplied to the camera adaptor.
-
Page 13: Ps-570/N
Connection and Settings Optical Fiber Transmission System PS-470/N PS-570/N Make sure to turn off the POWER switch of each unit before connecting. Connection and Settings 1. Power supply connection 1-2. Power supply connection / DC Operation 1-1. Power supply connection / AC Operation The DC power to the camera is supplied from the battery. DC power is supplied to the Camera Adaptor from the Base Station. ＊ When the DC operation, the Base Station cannot supply The DC power is supplied to the camera. the DC power to the Camera Adaptor. AC 85V〜220V DC Power DC 12 V AC Power PS-570/N Rear panel PS-570/N SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) DC IN... - Page 14 Optical Fiber Transmission System PS-470/N PS-570/N Connection and Settings 2. Camera SDI signal connection Camera signal 3G/HD/SD-SDI Camera Signal Output PS-470/N SDI IN Input Through Output to Monitor, etc. SDI OUT THROUGH OUT REMOTE L REMOTE SDI OUT THROUGH OUT RET OUT SDI IN SDI IN TC OUT TC IN TALLY OUT REF OUT from Camera Camera Signal Input Camera Signal Output to Switcher to Monitor, etc. SDI OUT 1 (Two outputs) SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) DC IN (10.8V-15V)
- Page 15 Optical Fiber Transmission System PS-470/N PS-570/N Connection and Settings 3. SDI RETURN signal connection REFERENCE signal connection Return signal Reference signal 3G/HD/SD-SDI Reference signal Input Return SDI signal Input REF IN RET IN PS-570/N PS-570/N SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) DC IN (10.8V-15V) DC IN (10.8V-15V)
- Page 16 Optical Fiber Transmission System PS-470/N PS-570/N Connection and Settings 4. TIME CODE signal connection 4-1. Time Code signal 4-2. Time Code signal from Base Station to Camera Adaptor from Camera Adaptor to Base Station Time Code signal Output Time Code signal Input TC IN TC OUT PS-570/N PS-570/N SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) DC IN (10.8V-15V) DC IN (10.8V-15V)
- Page 17 Optical Fiber Transmission System PS-470/N PS-570/N Connection and Settings 5. TALLY signal Connection TALLY signal Input TALLY / INTERCOM (D-Sub 25P) Pin assignment TALLY / INTERCOM 1 14 PROD OUT + (D-sub 25P) 2 15 PROD OUT - 3 16 SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) 4 17 PROD IN + 5 18 PROD IN - DC IN (10.8V-15V) TC IN TC OUT REMOTE L REMOTE 2 AC IN (85V-220V) 6 PGM 1 + ...
- Page 18 Optical Fiber Transmission System PS-470/N PS-570/N Connection and Settings 6. REMOTE Control Connection Remote Controller REMOTE 1 (8P) LAN(OPTION) (RJ45) SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) (Optional) DC IN (10.8V-15V) TC IN TC OUT REMOTE L REMOTE 2 AC IN (85V-220V) (OP) TALLY / INTERCOM PRO INTERCOM ENG(OP) NIPPON VIDEO SYSTEM CO., LTD...
- Page 19 Optical Fiber Transmission System PS-470/N PS-570/N Connection and Settings 7. PGM Audio (Analog) Connection and Settings PS-570/N PROTECH OPTICAL FIBER BASE STATION SIGNAL INDICATOR POWER SIGNAL INDICATOR INTERCOM H.S PROGRAM AUDIO IN PRG 1 H.P LEVEL AUDIO MONITOR INTERCOM H.S (XLR 4P) PRO/ENG switch PRG 1 LEVEL Volume control H.P LEVEL Volume control Setting Headset TALLY / INTERCOM (D-Sub 25P) Pin assignment 1 14 PROD OUT + SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) 2 15 PROD OUT - DC IN (10.8V-15V)
- Page 20 Optical Fiber Transmission System PS-470/N PS-570/N Connection and Settings 8. Intercom Connection and Settings Intercom Intercom Connection Settings PS-470/N INTERCOM INTERCOM AUDIO-PGM 1 Volume Control CAMTAP AUDIO-PGM 1 H.P VOL Volume Control H.P VOL MIC ON/OFF Switch DC 15V OUT (MAX.3.5A) SIGNAL INDICATOR REMOTE L REMOTE SDI OUT THROUGH OUT RET OUT SDI IN SIGNAL INDICATOR CAMTAP TC OUT TC IN REF OUT TALLY OUT DC 15V OUT (MAX.3.5A) OPTION INTERCOM H.P (XLR 4P) Headset 4W INTERCOM Line INTERCOM PRODUCER Line INTERCOM ENGINEER Line(optional) TALLY / INTERCOM...
- Page 21 Dimensions CAMERA ADAPTOR PS-470/N PS-470/N INTERCOM CAMTAP AUDIO-PGM 1 H.P VOL DC 15V OUT (MAX.3.5A) SIGNAL INDICATOR CAMTAP DC 15V OUT (MAX.3.5A) OPTION REMOTE L REMOTE SDI OUT THROUGH OUT RET OUT SDI IN TC IN TC OUT REF OUT TALLY OUT...
- Page 22 Dimensions BASE STATION PS-570/N PS-570/N PROTECH SDI OUT 1 OPTION RET IN REF IN REMOTE 1 LAN(OPTION) OPTICAL FIBER BASE STATION DC IN (10.8V-15V) POWER TC IN TC OUT REMOTE L REMOTE 2 AC IN (85V-220V) (OP) SIGNAL INDICATOR INTERCOM H.S TALLY / INTERCOM H.P LEVEL PRG 1 PRO INTERCOM ENG(OP) NIPPON VIDEO SYSTEM CO., LTD...
- Page 23 Specifications CAMERA ADAPTOR PS-470/N PS-470/N Input/Output SDI Input SDI IN BNC x1 3G/HD/SD SDI OUT THROUGH OUT BNC x1 SDI IN SDI Input Through Output SDI Through Output SDI Return Output RET OUT BNC x1 3G/HD/SD Timecode Input TC IN BNC x1 Timecode Output TC OUT BNC x1 Reference Output REF OUT BNC x1 DC Power DC Input SMPTE Via OPT Cable from Base Station when AC operation only BATTERY IN V-mount x1 When DC operation *When DC operation, Base station cannot supply the DC Output DC 15V OUT V-mount x1 For the camera DC power to Camera adaptor. DC 15V OUT (MAX.3.5A) CAMTAP female x2 DC Power Output 120 W*...
- Page 24 Specifications BASE STATION PS-570/N PS-570/N Input/Output SDI OUT 1 SDI Output BNC x2 3G/HD/SD Return Input RET IN BNC x1 3G/HD/SD Time Code Input TC IN BNC x1 Time Code Output TC OUT BNC x1 Reference Input REF IN BNC x1 DC Power AC Input AC IN (85V-220V) AC 100/200 V *When DC operation, Base station cannot supply the DC Input XLR 4P x1 DC 12 V DC IN (10.5V-15V) DC power to Camera adaptor. SMPTE via OPT Cable to Camera Adaptor DC Output 150 W* DC Power Output *But the output may be limited by the Max. condition of the load or the input, etc. Audio Audio Input D-Sub 25P x1 ※ AUDIO-PGM 1/2 IN ANALOG 2 channels ...
Need help?
Do you have a question about the PS-470/N and is the answer not in the manual?
Questions and answers