Hitachi StarBoard FX Series Setup Manual page 5

(3) And then, make sure the bottom LED is solid green.
(4) Insert the CD-ROM bundled with SX-2000WG+ into the PC and select "Run
AUTORUN.EXE". If the menu is not displayed automatically, double-click on "Autorun"
in the CD-ROM root.
(5) If the "Security Warning" window is shown, select "Run". (This window may not be
shown foreground.)
All Rights Reserved. Copyright © 2010, Hitachi Software Engineering Co., Ltd.
If the LED shows wireless
If the LED is blinking green (wireless connection)
as shown below, follow (a)-(c) in the section 3(2).
If still not good, refer to Trouble shooting 7(1)
5