Disassembling An A12 Array; Open The Angle Locks And Attach The Vt - JBL VTX Series Manual

10 - DISASSEMBLING AN A12 ARRA Y
Carefully follow the steps in this chapter to correctly and safely disassemble an array.
10.1 OPEN THE ANGLE LOCKS AND A TT ACH THE VT
STEPS:
• To desuspend an array of VTX A12 cabinets, begin by safely lowering the entire array to a working height.
1
• Press the Release Buttons to open the red Angle Lock mechanisms for the lower four cabinets. This allows the bottom four
2
VTX A12 cabinets to collapse back to the 10-degree position.
• Attach the Vertical Transporter to the bottom cabinet. Lift the VT by the round bar at its rear and connect the rear attachment
3
points with quick release pins, then lift the front of the VT and use QRPs to attach it at the front of the VTX A12 cabinet.
1
VTX A12 | Rigging Manual
2
42
3