Advertisement
LED 2*
•
•
•
•
•
•
•
•
•
•
•
•
•
* LED 2 (RS) displays generic diagnostic codes specifi c to the remote start module. Orange LED fl ashes may appear red.
** LED 1 (Bypass) displays diagnostic codes specifi c to the fi rmware loaded on the module.
Visit the programming diagnostics page for more information.
Patent No. US 8,856,780 CA 2759622
Automotive Data Solutions Inc. © 2022
MODULE DIAGNOSTICS - 2 OF 2
LED 1**
LED STATUS
Flashing rapid RED
Flashing slow RED
Solid RED
Flashing rapid GREEN
1 GREEN fl ash
3 GREEN fl ashes
4 GREEN fl ashes
•
Flashing GREEN
•
Rapid GREEN fl ashing
Solid RED
1 GREEN fl ash
4 RED fl ashes
5 RED fl ashes
6 RED fl ashes
7 RED fl ashes
DIAGNOSTIC
Remote start shutdown sequence.
Remote start shutdown error code. Contact technical support.
Remote start crank delay.
Remote start cycle in progress. Working correctly.
Remote start initiated successfully.
Idle mode cycle in progress.
Turbo mode cycle in progress.
Remote start cycle in progress. Displays vehicle platform during runtime.
Secure takeover initiated. Waiting to complete takeover after brake press.
Remote programming in progress, waiting for remote pairing.
Remote programmed.
Shutdown remote starter before attempting remote programming.
Engine must be off before attempting remote programming.
System must be unlocked/disarmed before attempting remote programming.
Module must be learned to the vehicle before attempting remote programming.
OL-RS-BA
PAGE 7 OF 28
• 20220110
www.idatalink.com
Advertisement
