Advertisement
>>
The following procedure programs
aftermarket remotes to the remote starter.
>>
WARNING: Program aftermarket remotes
before usage. A maximum of four [4x]
aftermarket remotes per system.
01
Set ignition to ON position.
OFF
ACC
ON START
ON
ENGINE
START
STOP
02
Press and release the antenna button three
times [3x].
03
The parking lights will fl ash once [1x], the
horn will chirp once [1x].
04
The remote starter LED will turn RED and the
antenna LED will fl ash.
Patent No. US 8,856,780 CA 2759622
Automotive Data Solutions Inc. © 2022
TYPE 1 - REMOTE PROGRAMMING - 1 OF 1
OL-RS-BA + CRIMESTOPPER
05
Press once [1x] on LOCK button of aftermarket
remote.
06
The remote starter LED will fl ash GREEN once
[1x] then will turn RED.
07
To program additional remotes: repeat steps 5
to 6 using each additional remote.
08
Set ignition to OFF position.
OFF
OFF
ACC
ON START
ENGINE
START
STOP
09
The remote starter LED will turn OFF and the
antenna LED will turn OFF.
10
The parking lights will fl ash twice [2x], the
horn will chirp twice [2x].
OL-RS-BA
11
Remote Programming completed.
>>
TO DELETE ALL REMOTES: repeat steps 1 to
4 then press and hold the antenna button for
6 seconds. The parking lights will fl ash twice
[2x], the horn will chirp twice [2x].
PAGE 15 OF 28
• 20220110
OL-RS-BA + CRIMESTOPPER
www.idatalink.com
Advertisement
