Page 1
Ceramic Kamado Tabletop BBQ User instruction – Please keep for future reference 3241GRILL20SEB03 / 3241GRILL20SEB05 User instructions – Please keep for future reference IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions. This instruction is part of the product.
Page 2
Mushikamado was a round clay pot with a removable domed lid designed for steaming rice. The name 'Kamado' is, in fact, the Japanese word for 'stove' or 'cooking range'. The name where adopted by the Americans and has now become a generic term for this style of ceramic cooker.
Page 3
Light the charcoal according to the instructions above. DO NOT move or stoke the coals once lit. Open the bottom vent fully and leave the lid open for about 1O minutes to build a small bed of hot embers. Monitor the Kamado until it has risen to the desired temperature.
Page 4
Light the charcoal according to the instructions on page 3. Close the lid and fully open the top and bottom vents. • Monitor the Kamado until it has risen to the desired temperature. See page 4 for a temperature cooking guide. Close the top vent half way and continue to check the temperature for a few more minutes.
Page 5
For ease of assembly only loosely tighten the bolts and then tighten fully when assembly is complete. WARNING: DO NOT over tighten bolts; only tighten with moderate pressure to avoid damaging the bolts or components of the Kamado BBQ ASSEMBLY INSTRUCTIONS IMPORTANT: Remove any packaging before use, but retain the safety instructions and store them with this product.
Page 6
Secure the handle(5) with the 2x pre-attached dome headed nuts. STEP 4: Place the Kamado grill on the cart with the bottom vent facing to the front of the cart allowing the vent to open and close without any interruption.
Page 7
ASSEMBLY INSTRUCTIONS STEP 5: When the grill is securely placed on the stand, add the firebox(8), charcoal plate(7), and cooking grill(6) inside the Kamado grill as displayed in the assembly diagram.
Page 8
ASSEMBLY INSTRUCTIONS STEP 6: To attached the handle(5) to the lid of the Kamado grill(9), start by aligning the bolts hole of the handle to pre-installed bolts on the lid. Secure the handle(5) with the 2x pre-attached dome headed nuts.
Need help?
Do you have a question about the 3241GRILL20SEB03 and is the answer not in the manual?
Questions and answers