S I M O N E
STAINLESS STEEL BATHTUB
SKU: 934591, 912095
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing �xtures. Signature
Hardware accepts no liability for any damage to the �oor,
plumbing or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
GETTING STARTED
Ensure that you have gathered all the required
materials that are needed for the installation.
Ensure that your bathroom �oor is
adequately supported, and the �nished
�oor is level.
Keep the plumbing connections around
the tub easily accessible for any future
maintenance that may be necessary.
For Warranty information, please visit: signaturehardware.com/services/warranty
PLANNING
Use the tub's PDF speci�cation sheet as a reference
when planning your layout. The speci�cation sheet
can be found and downloaded from the product
page on our website.
Because the tub speci�cation measurements are
approximate and slight variations may occur, we
highly recommend performing any rough-in
procedures with the tub on site. For on-site rough-in
information, go to the appropriate drain installation
section.
TOOLS AND MATERIALS:
Tape Measure
Plumbers
Tape
Silicone Sealant
Hacksaw
(100% Neutral
Level
1
Pencil
Damp Cloth
Cure)
REVISED 02/12/2020
CODES: 503498, 503497
Need help?
Do you have a question about the SIMONE 934591 and is the answer not in the manual?
Questions and answers