Wrist Placement And Charging; Every-Day Wear; During Activity - Motorola moto watch 100 Manual

Wrist Placement and
Charging

Every-day wear

Wear your watch with at least one fingers' width
below your wrist bone to ensure that the optical
heart rate sensor can monitor correctly during
daily wear. The back of the watch should
maintain contact with your wrist and no light
should escape the sensor.

During activity

Ensure the watch is at least two fingers' width
below your wrist bone. The watch should be
slightly tighter than daily wear to prevent
movement during activity but not too tight to reduce blood flow.
Charging
To charge your Moto Watch 100:
● Attach the USB end of the included charger
into a computer or charging brick
● Remove the watch and ensure the back of the
watch is dry and clear of any debris
● Bring the POGO pin end of the charger near
the metal pins on the back of the watch
● Magnets in the charger and watch will align
the charger the correct way on the watch and
begin charging. The watch will vibrate and
show the current charge level while charging.
4