Table of Contents
Advertisement
14
www.aeg.com
8.6 Flecken/Vorwäsche
Press this button repeatedly to activate
one of the available options.
• Flecken
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment . The stain remover will
be added in the appropriate phase of
the washing programme.
This option can increase
the programme duration.
This option is not
available with a
temperature lower than
40 °C.
• Vorwäsche
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.
This option can increase
the programme duration.
The relevant indicator comes on.
8.7 Schleudern
When you set a programme, the
appliance automatically selects the
maximum spin speed allowed.
Touch this button repeatedly to:
• Decrease the spin speed.
• Activate the Spülstopp option.
The water of the last rinse is not
drained out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum and the
final spin phase is not performed.
The door stays locked. The related
indicator comes on. The drum turns
regularly to reduce creasing. You
must drain the water to unlock the
door.
Touch Start/Pause button: the
appliance performs the spinning
phase and drains the water.
• Activate the Nachtprogramm option
All spinning phases are suppressed
and Leichtbügeln is automatically
deselected if previously set. The
programme ends with water in the
drum. The Spülstopp indicator flashes
to remind customer to drain water
before unloading laundry. The door
stays locked. The related indicator
comes on. The drum turns regularly to
reduce creasing. You must drain the
water to unlock the door. Touch the
Start/Pause button: the appliance
performs only the draining phase.
As the programme is very
quiet, it is suitable for use at
night time when cheaper
electricity tariffs are
available. In some
programmes the rinses are
performed with more water.
The appliance empties the
water out automatically after
approximately 18 hours.
8.8 Option
By touching this button you can set:
• Energiesparen option at first touch.
For programme Pflegeleicht 60°- 40°-
30° the Time to end of the cycle is
incremented and energy consumption
reduced.
• Leichtbügelnoption at second touch.
The spin speed reduced to 800 rpm.
• Nur Spülen option at third touch. The
washing programme starts from the
rinsing phase by skipping the wash
phase.
All set options (except
permanent extra rinse)
are deselected
automatically.
• Nur Schleudernoption at fourth touch.
The appliance skips wash and rinse
phase.
• Nur Abpumpen option at fifth touch.
The appliance performs only the drain
phase.
At sixth touch the appliance
proposes the default setting
of the washing programme
again.
Advertisement
Table of Contents
