Advertisement
Quick Links
Riverside
email:
info@riverside-furniture.com
Hardware and Parts packed with the Queen Storage Footboard
Queen Roll Slat
Queen Storage
(61" X 80-7/8")
Footboard
F-A
1 pc.
F-B
Drawer Box
5
∅
-18 x 1-1/2" Long
16
Support Leg
Allen Head Bolt
8-3/4" long with
leveler
F-E
F-F
2 pcs.
5
#8 x 1" Wood
Ø
x 19 x 2mm
16
Screw
Flat Washer
F-I
F-J
8 pcs.
Hardware and Parts packed with the 5/0-6/6 Bed Rails
Queen / Eastern King
Bed Rail
R-A
12mm Open Wrench
4mm Allen Wrench
R-F
R-G
1 pc.
Note: For a Storage Bed, the Wood
Slat Support Cleat mounted on the
back side of the Bed Rails must be
mounted at the upper location. If
needed, using the Allen Wrench
(R-G) remove the Bolts and
Washers and remount it at the
upper position on the Bed Rails. It
is mounted at the lower position
for a Standard Bed.
The Filler Rail mounted at the top
edge of the California King Bed
Rails must also be temporarily
removed to assemble the Slats on
the Bed.
ASSEMBLY STEPS :
1. Place the Storage Footboard (F-A) face down on a clean and soft
surface.
2. Attach the Drawer Box Support Legs (F-E) using the Flat Washers
(F-I), Spring Washers (F-H) and 1-1/2" long Bolts (F-F). Tighten with
the Allen Wrench (F-K). See Detail A.
Vogue Bed Room
Queen Bed
FURNITURE
Assembly Instructions
Slat Support Rails
Part B
Part A
1 pc.
F-C
5
∅
-18 x 2-3/4" Long
16
Allen Head Bolt
6 pcs.
F-G
5mm Allen Wrench
8 pcs.
F-K
5
-18 x 3-1/2 " Long
∅
16
All-Thread Bolt
R-B
8 pcs.
2 pcs.
Be sure to check all packing material carefully for small parts, which may
have come loose inside the carton during shipment. To prevent possible
scratches or damage, this furniture should be assembled on a soft surface
such as a blanket or carpet.
1 pc.
To prevent possible damage to furniture and personal injury, it is
recommended that two people are used to assemble and set-up this bed.
Slat Support Leg
2 pcs.
F-D
1 pc.
5
Ø
x 12 x 3mm
16
Spring Washer
F-H
8 pcs.
2 pcs.
1 pc.
5
Ø
-18 Hex Nut
16
R-C
8 pcs.
Slat Support Cleat
R-G
Page 1 of 3
Made in Viet Nam
46170
4/6-5/0 UPH HEADBOARD
46173 5/0 UPH BENCH STORAGE FOOTBOARD
46172 5/0-6/6 BED RAILS
46174
4/6-5/0 PANEL HEADBOARD
46173 5/0 UPH BENCH STORAGE FOOTBOARD
46172 5/0-6/6 BED RAILS
5
Ø
x 12 x 3mm
M5/16" x 19*2mm
16
Spring Washer
Flat Washer
R-D
R-E
8 pcs.
Detail: A
F-I
F-H
F-F
F-E
8 pcs.
F-A
F-K
Advertisement
Related Manuals for Riverside Furniture Queen 46170
Summary of Contents for Riverside Furniture Queen 46170
- Page 1 Page 1 of 3 Vogue Bed Room Riverside Made in Viet Nam Queen Bed FURNITURE 46170 Assembly Instructions email: info@riverside-furniture.com 4/6-5/0 UPH HEADBOARD Hardware and Parts packed with the Queen Storage Footboard Queen Roll Slat Slat Support Leg Queen Storage Slat Support Rails (61"...
- Page 2 Page 2 of 3 Vogue Bed Room Riverside Made in Viet Nam Queen Bed 46170 FURNITURE Assembly Instructions 4/6-5/0 UPH HEADBOARD email: info@riverside-furniture.com 3. Lean the back of the Headboard against the wall where the Bed will be assembled. 4. Install two All-Thread Bolts (R-B) into the metal threaded inserts installed in the Headboard Legs and into the metal inserts on the Footboard.
- Page 3 Page 3 of 3 Vogue Bed Room Riverside Made in Viet Nam Queen Bed FURNITURE 46170 Assembly Instructions 4/6-5/0 UPH HEADBOARD email: info@riverside-furniture.com 46173 5/0 UPH BENCH STORAGE FOOTBOARD 46172 5/0-6/6 BED RAILS 46174 4/6-5/0 PANEL HEADBOARD After the Bed is assembled, completely unroll the Bed Roll Slat (F-B) onto the Bed.