GE GCL22KGR Owner's Manual And Installation page 24

INSTALLING THE REFRIGERATOR
REPLACE THE BASE GRILLE
8
Replace the grille by installing the two
Phillips head screws.
9 SET THE CONTROLS
Set the controls to the recommended
setting.
Installation Instructions
24
(CONT.)
START THE ICEMAKER
10
Set the icemaker power switch to the
ON position. The icemaker will not begin
to operate until it reaches its operating
temperature of 15°F (–9°C) or below.
It will then begin operation automatically.
It will take 2–3 days to fill the ice bin.
Power
switch