Assembly (continued)
4
Attaching the arms
□
Attach the back of the arm (J) to the seat frame (D)
using a washer (EE) and socket hex bolt (BB) .
□
Attach the front of the arm (J) to the seat frame (D)
using washers (EE) and hex bolts (AA).
□
Repeat these instructions to attach the other arms
to the seat frames.
NOTE: Do not fully tighten the bolts.
5
Adding the bolt caps and cushions
□
Ensure all bolts are aligned and assembled correctly.
□
Tighten all socket hex bolts (BB) with the allen wrench.
Attach the socket hex bolt caps (GG).
□
Tighten all hex bolts (AA) with the hex wrench.
Attach the hex bolt caps (FF).
□
Place the seat cushion (F) and lumbar pillow (E) onto
the chairs.
J
F
8
EE BB
AA
EE
E
GG
FF