Troubleshooting; Technical Specification - HALNy HLE-3GM Quick Installation Manual

the power adapter. Insert the other end of the power cord into the power socket,
⚫ Check whether the Power indicator is on. If it is on, the power supply is normal.
Otherwise, check whether the power cord and the power adapter are correctly
connected.

4 Troubleshooting

Symptom
The LED indicator is
not on
The LED indicator is
red

5 Technical Specification

Standard Ethernet
Uplink
Rate
Downlink
WAN interface
Interface
3 LAN ports
WiFi 2.4Ghz
WiFi 5Ghz
Physical Characteristics and Environment Requirements
Power adapter input
Whole-device power supply
Standard power consumption
HALNy HLE-3GM Quick Installation Guide
 Check whether the power connection is correct,
 Check whether the power adapter matches the
device.
 Check whether your Service Provider have network
problems,
 Check whether the network cable is properly
connected to WAN port
Main Technical Specifications
1000BASE-T
1Gbps
1Gbps
RJ-45 10/100/1000Mbps MDI/MDIX Self adaption
RJ-45 10/100/1000Mbps MDI/MDIX Self adaption
802.11n (2T2R MIMO) 300Mbps
802.11ac (2T2R MIMO) 876Mbps
100V～240V AC，50Hz～60Hz
12V DC，1A
<12W
Solution
6