Table of Contents
Advertisement
3 Router Installation
The chapter describes the required installation operations before you use the device
for the first time.
3.1 Installation Preparations
The Ethernet interface of your computer connects to the Ethernet interface of the
router. Before installing it, ensure that an Ethernet adapter is already installed in
your computer.
3.2 Connecting device
3.2.1 Connecting the Network Cable
Step 1 Use the one end of the network cable to connect the Ethernet interface of
the computer.
Step 2 Use other end of a network cable to connect the Ethernet interface on the
rear panel of the HALNy HLE-3GM.
3.2.2 Connecting the Power Adapter and Power Cord
⚫ Connect the output end of the power adapter included in the device package to
the input end of the power supply,
⚫ Insert one end of the power cord attached with the device into the input end of
HALNy HLE-3GM Quick Installation Guide
5
Advertisement
Table of Contents
