Table of Contents
Advertisement
Quick Links
10x8 Carter Hill Pergola
ITEM#：A106005300
SKU:
1281022
Questions, problems, missing parts?
Please call Sunjoy Group at 1(866) 578‐6569 anytime 24 hours / 7 days a week or visit
.
www.sunjoyonline.com for more information or assistance
GENERAL BEST PRACTICES FOR ASSEMBLY
• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the
product.
• The assembled pergola should be located at least 6 feet from any obstruction such as fence, garage,
house, overhanging branches, laundry lines or electrical wires.
• Some parts may contain sharp edges. Wear protective gloves if necessary, during assembly.
• Check all nuts and bolts periodically for tightness and, when required, tighten them again.
• Pay attention to the parts orientation.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sunjoy A106005300
Summary of Contents for Sunjoy A106005300
- Page 1 10x8 Carter Hill Pergola ITEM#：A106005300 SKU: 1281022 Questions, problems, missing parts? Please call Sunjoy Group at 1(866) 578‐6569 anytime 24 hours / 7 days a week or visit www.sunjoyonline.com for more information or assistance GENERAL BEST PRACTICES FOR ASSEMBLY • Please read and understand this entire manual before attempting to assemble or install the product. • Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. • The assembled pergola should be located at least 6 feet from any obstruction such as fence, garage, house, overhanging branches, laundry lines or electrical wires. • Some parts may contain sharp edges. Wear protective gloves if necessary, during assembly. • Check all nuts and bolts periodically for tightness and, when required, tighten them again. • Pay attention to the parts orientation.
-
Page 2: Tools Needed
∙ TOOLS NEEDED Included WARNINGS • Steel components for this pergola are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and thus not covered by the warranty. • To minimize this condition, it is recommended to use care when assembling and handling the product to prevent scratching the paint. Should any scratching or damage occur, it is recommended to cover the scratch immediately with rust inhibiting paint (not included). • Surface rust can also be easily removed with a very light application of regular cooking oil or WD‐40. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping onto deck or patio and caused damaging stains, which may be difficult to remove. This can be prevented if the above‐mentioned measures are taken to keep the product from oxidizing. • Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts. • Keep instruction manual for future reference. • Keep the original packaging to store the pergola. • Periodically check and ensure that all bolts are well‐tighten during use. MAINTENANCE • Install the pergola on level ground. Stakes are provided to secure the pergola to the ground. • Do not assemble the pergola on sandy, muddy or loose soil, as stakes do not have enough anchorage in these types of soil. • If you wish to secure the pegola to a wood deck or concrete surface, use anchors suited to these surfaces. • Snow must be cleared off regularly during snowy days. • Do not leave the pergola where there is a risk of high wind, as possible damage will occur to the structure. • Any assembly or maintenance of the product must be carried out by adults only. • Please check your state and local regulations prior to purchasing. Some jurisdictions may require permits for installation and use. Some special procedures may be valid in your area. ... -
Page 3: Exploded Drawing
∙ EXPLODED DRAWING ... -
Page 4: Parts List
∙ Parts List Label Part Number Description Qty Part Image A Top Bar 1 P000601073 7 B Top Bar 2 P000601074 7 C Long side Support bar 1 P000601075 2 D Long side Support bar 2 P000601076 2 E Short side Support bar 1 P000601077 2 F Short side Support bar 2 P000601078 2 G1 Corner Connector 1 P000500864 2 G2 Corner Connector 2 P000500865 2 H Post ... -
Page 5: Hardware Pack
O1 Rail beam 1 2 P005700307 O2 Rail beam 2 2 P005700308 P Ring 16 P005100107 O Canopy 2 P006400014 Hardware Pack Label Part Number Description Qty Spare Part Image H010020011 AA Bolt M6*15 114 6 H050030001 BB Flat Washer M6 160 5 H010110018 CC Bolt M6*45 14 1 H010110009 DD ... - Page 6 ∙...
- Page 7 ∙...
- Page 8 ∙...
- Page 9 ∙...
- Page 10 ∙...
- Page 11 ∙...
- Page 12 ∙...
- Page 13 ∙...
- Page 14 ∙...
- Page 15 ∙...
- Page 16 ∙...
- Page 17 ∙ Country of Origin: China Production Number: 2021300015...
Need help?
Do you have a question about the A106005300 and is the answer not in the manual?
Questions and answers