Cleaning Chart - Capital MAESTRO MWO301ES Use And Care Manual

CLEANING CHART:

•
Always start by selecting the mildest cleaner according to the kind of soil and the material soiled. To
prevent marring the stainless steel finish, always apply the cleaners in the direction of the grain. Rinse
and dry immediately to avoid water marks.
•
Use clean applicators, i.e. soft cloths, sponges, or paper towels for cleaning and scouring.
•
The use of brand names in the char is intended only to indicate a type of cleaner. This does not constitute
an endorsement. The omission of any brand name does not imply its inadequacy.
•
The brands listed on the chart are suggested as examples of a type of cleaner, such as non-abrasive,
powder, cream, etc., use all products in accordance with the manufacturer's instructions.
PART /
MATERIAL / SOIL
CONDITION
Outer glass Non-Abrasive window cleaner, all purpose
surfaces cleaners
Hot sudsy water. Rinse and dry thoroughly
Inner Door Glass
Non-Abrasive window cleaner, all purpose
cleaners
Non-abrasive cleaners; hot water and
detergent, diluted ammonia, Fantastic®,
Formula 409®. Rinse and dry immediately
Exterior Stainless
Steel
Cleaner polish. Stainless Steel Magic® to
protect the finish form staining and pitting;
enhances appearance
Hot sudsy water. Rinse and dry thoroughly
Interior porcelain
Non-abrasive cleaners; hot water and
surfaces
detergent, diluted ammonia, Fantastic®,
Formula 409®. Rinse and dry immediately
Hot sudsy water. Rinse and dry thoroughly
Non-abrasive cleaners; hot water and
Interior glass
detergent, diluted ammonia, Fantastic®,
surfaces
Formula 409®. Rinse and dry immediately
Heavy soiling may be lightly scraped with a
razor.
Hot sudsy water. Rinse and dry thoroughly
Oven Racks
Lightly abrasive cleaners; hot water and
detergent, diluted ammonia, Fantastic®,
Formula 409®. Rinse and dry immediately
SUGGESTED CLEANERS IMPORTANT REMINDERS
Abrasive cleaners may leave
scratches over time
Always use clean dry cloths for best
results
Inner windows have a heat reflective
coating that will scratch if abrasives
are used
Always use clean dry cloths for best
results
Always rub lightly in the direction of
the grain lines
Remove all residue from oven by
wiping with a clean wet sponge after
cleaning
Remove all residue from oven by
wiping with a clean wet sponge after
cleaning
Always use extreme caution when
handling sharp tools
Remove from oven for cleaning. Take
care to prevent paste or powder
cleaners from getting into roller
bearings
Scrub with a lightly abrasive sponge
or cleaning products to remove heavy
staining
25