Installation Instructions - Shell SPS-500-01 Manual

Portable power station
Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS

Charging the product
• Fully charge the product before first use�
• During charging, the input indicator
are flashing�
• When the input indicator
product is fully charged� Disconnect the charger from the product�
• There are 4 ways of charging the product:
Charging method
30
Power adaptor
12 V car charger
65 W solar panel
MPPT (not provided)
USB-C power delivery
65 W (not provided)
not support less than
PD 65W charger
Want to be faster? Here is a way to speed up the charging time:
Connect both 65W power adapter and USB-C power delivery 65W charger at the
same time, you can have the most optimum charging rate at 130W maximum, the
duration time will be around 4�5 hours to fully charge�
NOTICE
14
goes off and the battery level
How to charge
• Connect the power adaptor
to the DC socket
30
• Connect the car charger plug
29
to the DC socket
• Connect the solar panel
plug
to the Anderson sockets
or
to the DC socket
(connect to one at a time)
• Connect the charger to the
USB-C PD socket
14
lights up and the bars of the battery level
16
16
15
16
20
3
shows 100 %, the
Full charge duration
around 9 hours
around 9 hours
around 9 hours
(depending on the
weather conditions)
around 9 hours
3
9

Advertisement

Table of Contents
loading

Table of Contents