IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING – When using this product, basic precautions should always be followed, including the following: a) Read all the instructions before using the product� b) To reduce the risk of injury, close supervision is necessary when the product is used near children�...
• Do not disassemble the product, there are no user-serviceable parts inside� Incorrect reassembly may result in electrical shock, chemical burn, fire, or explosion causing personal injury or damage to other devices� Disassembly of the product will void the warranty� •...
INTENDED USE • This product is intended for charging external devices� This product supports DC and AC outputs and provides USB-A & QC, USB-C PD and wireless charging functionality� • This product features an emergency light function to alert other motorists of non-moving objects on the road�...
PARTS AND FEATURES Mins Hours Watts OVERLOAD COLD USB-A TYPE-C CAR PORT 12V WIRELESS Item Part Name Item Part Name Display Over temperature warning Power of input/output Low temperature warning Battery level Output mode Battery life time LED indicator Overload warning Error indicator...
Page 7
17 18 19 20 21 22 Item Part Name Item Part Name Power button USB-C PD socket (input&output) DC output on/off button AC power socket x2 Car charger socket AC output on/off button Input indicator USB output on/off button Anderson sockets (Solar panel) DC socket (input only) LED light on/off button DC socket x2 (output only)
Page 8
Item Part Name LED light module 12V car charger Power adaptor...
INSTALLATION INSTRUCTIONS Charging the product NOTICE • Fully charge the product before first use� • During charging, the input indicator lights up and the bars of the battery level are flashing� • When the input indicator goes off and the battery level shows 100 %, the product is fully charged�...
OPERATING INSTRUCTIONS Before operating the product, refer to the Important safety instructions chapter on P� 3 in order to avoid the risk of fire, electric shock or injury to persons� Switching on/off NOTICE • After 2 minutes of inactivity without any power input/output, the display goes off�...
Page 11
Charging external devices CAUTION • Before connecting, ensure the connected device(s) do not exceed the product’s output (see the Specifications chapter, P� 14)� • Switch off external devices before connecting them to the product� When the product is on, press the corresponding button to charge: How to charge Start/stop charging On indicator...
Operating the LED light module (not only for emergency use) NOTICE • The LED light module can be used to support the emergency triangle of your vehicle to alert other motorists of non-moving object on the road� • Place the emergency triangle of your vehicle 100 feet (30 m) behind the vehicle, and this product, with the emergency light on, 10 feet (3 m) behind the vehicle�...
USER MAINTENANCE INSTRUCTIONS CAUTION • Install the plug covers before cleaning and/or storing the product� • Always carry the product by the handle � • Disconnect all external devices and switch off the product before cleaning� • During cleaning, do not immerse the product in water or other liquids� Never hold the product under running water�...
SPECIFICATIONS General Model: SPS-500-01 Discharging temperature: -4°F to 140°F (±5°F), -20°C to 60°C (±3°C) Charging temperature: 32°F to 122°F (±5°F), 0°C to 50°C (±3°C) Net weight*: 15.0 lb (6.7 kg) Dimensions*: 11.81 x 7.08 x 8.66" (30 x 18 x 22 cm) *The weight and dimensions may vary due to measurement errors.
TROUBLESHOOTING Error code Problem Solution Remove extra devices from DC or Over load AC outputs PV (Solar panel) charging Replace another solar panel with input over-powered less output power� Temperature too high Keep the product at suitable ambient temperature� Temperature too low Output low voltage Recharge the station before use Remove the appliance and check if...
Page 16
Error code Problem Solution Charge the battery� The product does not switch on (see Charging the product chapter, P� 9) Ensure to press the corresponding charging type button� (see Charging external The product does not charge devices chapter, P� 11) or operate Ensure the device and charging cables are functioning�...
The warranty terms and conditions are subject to change without prior notice� e) Product specifications are subject to change without prior notice� f) Shell shall not be liable for technical or editorial errors or omissions contained herein� g) Visit www�skyintelligent�com/support for support and the latest product information�...
FCC STATEMENT FCC SUPPLIER’S DECLARATION OF CONFORMITY Unique Identifier SPS-500-01 Responsible Party TianHeng Consulting, LLC U�S� Contact 392 Andover Street, Information Wilmington, MA 01887, USA Email support@skyintelligent�com FCC COMPLIANCE STATEMENT 1� This device complies with Part 15 of the FCC Rules� Operation is subject to the following...
Page 19
ISED COMPLIANCE STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s)� Operation is subject to the following two conditions: (1) This device may not cause interference� (2) This device must accept any interference, including interference that may cause undesired operation of the device�...
Page 20
Portable Power Station 583Wh Portable Lithium Battery Emergency Power Source SPS-500-01 Power Station is part of the Shell Energy range of products. Shell and the Shell Pecten logo are trade marks of Shell. Used under license. V4�0...
Need help?
Do you have a question about the SPS-500-01 and is the answer not in the manual?
Questions and answers