Table of Contents
Advertisement
Available languages
Available languages
Getting started
Carefully remove the walkie-talkie from the package. If you discover any visible damage, do not use the
walkie-talkie and contact your dealer.
Inserting the batteries
1.
Release the catch on the battery compartment cover and remove the
cover.
2.
Insert three AAA batteries or rechargeable NiMH batteries.
3.
Refit the cover so that it snaps into place.
Switch the walkie-talkie off after use to save the batteries.
Remove the batteries if the walkie-talkie is not going to be used for a
long time.
Loosening the belt clip
1.
Pull the belt clip catch away from the walkie-talkie.
2.
While pulling the catch, move the belt clip upwards to loosen it from the walkie-talkie.
Attaching the belt clip
1.
Push the belt clip into the bracket, see the figure to the right above.
You hear a "click" when the catch locks in position.
2.
Changing channel
The walkie-talkie has eight selectable channels. To change channel:
1.
Press the power switch until the current channel number flashes on the display.
2.
While the channel number is flashing:
Press the up button to select a higher channel number.
Press the down button to select a lower channel number.
The channel number changes from 1 to 8 or from 8 to 1.
3.
Press the PTT button to confirm the selected channel and return to normal mode.
Selecting high/low output
1.
Press the power button twice to enter the function to select a high/low output.
2.
Press the up or down button to select the output level. "L" is displayed when low level is selected. A
low output level can extend battery life, but at the same time reduces the range.
Monitoring
You can select monitor to check weak signals on the selected channel.
1.
Press the power switch three times to enable this function.
2.
Press the power switch once again to disable the function.
Using the lamp
Press the lamp button to switch on the lamp. The lamp also works when the walkie-talkie is switched off.
Automatic energy saving function
The walkie-talkie automatically enters an energy power saving mode to extend battery life six seconds
after the last operation. However, the walkie-talkie can still receive transmissions in this mode.
ENGLISH
OPERATION
21
Advertisement
Table of Contents
