Care And Cleaning; Control Knobs; Porcelain Enamel Cooktop; Stainless Steel Surfaces - GE Profile JGP970 Owner's Manual

Care and cleaning of the cooktop.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
Pull the knob straight up off the stem.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective
shipping film with your fingers and slowly peel
it from the appliance surface. Do not use any
sharp items to remove the film. Remove all of
the film before using the appliance for the first
time.

Control Knobs

The control knobs may be removed for easier
cleaning.
Make sure the knobs are in the OFF positions
and pull them straight off the stems for
cleaning.

Porcelain Enamel Cooktop

The porcelain enamel finish is sturdy but
breakable if misused. This finish is acid-
resistant. However, any acidic foods spilled
(such as fruit juices, tomato or vinegar) should
not be permitted to remain on the finish.

Stainless Steel Surfaces

Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To assure no damage is done to the finish of
the product, the safest way to remove the
adhesive left from packaging tape on new
appliances is an application of a household
liquid dishwashing detergent. Apply with a soft
cloth and allow to soak.
NOTE: The adhesive must be removed from
all parts before using the cooktop. It cannot be
removed if it is baked on.
The knobs can be cleaned in a dishwasher or
they may also be washed with soap and water.
Make sure the insides of the knobs are dry
before replacing.
Replace the knobs in the OFF position to
ensure proper placement.
(on some models)
If acids spill on the cooktop while it is hot, use
a dry paper towel or cloth to wipe it up right
away. When the surface has cooled, wash with
an all-purpose cleaner and water. Rinse well.
For other spills such as fat spatterings, wash with
soap and water or an all-purpose cleaner after
the surface has cooled. Rinse well. Polish with a
dry cloth.
(on some models)
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer or Camco Parts Store
nearest you, please call our toll-free number:
National Parts Center 1.800.626.2002 (U.S.)
GEAppliances.com (U.S.)
www.GEAppliances.ca (Canada)
GEAppliances.com
1.800.661.1616 (Canada)
7