Advertisement
STEP 6
10
1. Tension the straps moderately.
2. Adjust the position of the
ALTERNATIVE
ADJUSTING
THE BIMINI SUPPORTS
support collars correctly
INSTALLATION
If the boat's configuration is suitable, attach the two blockers
(part 9 in the kit) to a deck element opposite the straps on
the cover.
The straps on the cover inserted in the blockers will keep the
product in the folded position.
1. Drill diameter 3.
2. Mill the holes.
3. Put silicon in the holes for sealing.
4. Screw in.
5. Use 3.5 x 16 screws (part 10 in the kit) + Washer
diameter 4 mm (part 15 in the kit).
.
WITHOUT SUPPORT
Assembly instructions - March 2021
8
ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE
RIGHT POSITION
NO
NO
YES
Advertisement
