Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS FOR
NOT02838
BIMINI
SUMMERTOP
INSTALLATION
ALU WITH SELVEDGE
2
X
FIRST
4
6
*Rear supports are included for the ACCESS Bimini Summertop
3
hr
s
KIT
COMPOSITION
5
1
ESSENTIAL TOOLS
⇢
Screwdriver
Drill with ø3mm, ø4mm and ø5mm drill bits
⇢
⇢
Tube of silicone
⇢
Measuring tape and pencil
1
2
3
7
8
Assembly instructions - March 2021
ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE
1.
CROSSBARS (x3)
2.
FEET (x2)
3.
CANVAS (x2)
4.
ATTACHMENT
KIT AND MANUAL
(x1)
5.
STORAGE
COVER (x1)
6.
STRAPS (x4)
7.
REAR SUPPORTS
(x2) *
8.
SUPPORT
ATTACHMENT
KIT
Advertisement
Summary of Contents for Access NOTO2838
- Page 1 FEET (x2) CANVAS (x2) ATTACHMENT KIT AND MANUAL (x1) STORAGE COVER (x1) STRAPS (x4) REAR SUPPORTS (x2) * SUPPORT ATTACHMENT *Rear supports are included for the ACCESS Bimini Summertop Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE...
- Page 2 Red sticker - Right Green sticker - Left The easiest way to start is to pass the canvases through the central crossbar, then slide them into the inner parts of the selvedges. Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE...
- Page 3 Do the same for the feet with the red washer. Front of the product Rear of the product Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE...
- Page 4 2. Make sure that all the feet are properly locked in place. FIXING THE SUPPORTS ON THE BOAT STEP 2 Attach the rear support collars to the two longer feet. Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE...
- Page 5 (see diagrams opposite). 3. Once correctly positioned, mark the location of each of the attachments with a pencil, for the feet and for the supports (depending on the model). Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE...
-
Page 6: Installing The Attachments
1. Use the collars and bolts provided (parts 5, 6 and 7 in the kit). 2. Use the set of shims (part 17 in the kit) adapted to the diameter of the handrail. Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE... - Page 7 Drill each mark using a ø 3 bit. Mill the holes. Put silicon in the holes for sealing. Screw the pad-eyes to the boat using 3.5 x 16 screws (part 8 in the kit). Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE...
- Page 8 3. Put silicon in the holes for sealing. 4. Screw in. 5. Use 3.5 x 16 screws (part 10 in the kit) + Washer diameter 4 mm (part 15 in the kit). Assembly instructions - March 2021 ACCESS ALU BIMINI SUMMERTOP WITH SELVEDGE...
- Page 9 3. Position the cover on the canvas 4. Close the cover YOUR BIMINI SUMMERTOP IS READY. ENJOY SAILING! Find the whole ACCESS range on Assembly instructions - March 2021 www.nvequipment.com ALU BIMINI SUMMERTOP WITH SELVEDGE by ACCESS...